EN 29
123
45
0
6
7 8 9
1
2
4
3
–+
PROGRAM 1
(VCR PLUS+ 12345678)
START STOP
8:00PM =10:00PM
DATE CH
12/24/98 12 SP
THU
PRESS (8=DAILY, 9=WEEKLY
STOP+/– = STOP TIME, SP/EP)
PRESS (OK) TO END
CHECK PROGRAM DATA
5
The PlusCode number you
entered and the matching
Timer-Recording informa-
tion is displayed on the
Program screen. Check to
make sure it’s accurate.
●To change the stop time,
press STOP +/–.
●To timer-record daily or weekly serials, press DAILY
(NUMBER “8”) or WEEKLY (NUMBER “9”). “DAILY”
or “WEEKLY” appears on the Program screen.
Pressing the button again makes each corresponding
display disappear.
●If you made a mistake, press CANCEL to access the
VCR Plus+ screen again and input the correct
PlusCode number.
●If the PlusCode number you inputted is incorrect,
"ERROR" may appear on the screen to advise you of
the error. This happens when the PlusCode number is
for a program which has already passed. "ERROR" is
displayed for about 5 seconds and the VCR Plus+
screen reappears.
SET TAPE SPEED
6
Press SP/EP.
RETURN TO NORMAL
SCREEN
7
Press PROG. or OK. "PROGRAM COMPLETED"
appears on the screen for about 5 seconds, then normal
screen appears.
ENGAGE TIMER MODE
8
Press TIMER. The VCR turns off automatically and "‰"
is displayed on the display panel.

IMPORTANT

If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong VCR
or CABLE CH number will be displayed on the VCR Plus+
program screen in step 5. When this happens, set the correct
Guide Channel number for that station. (墌 pg. 30, "VCR
Plus+ Setup")
NOTES:
●

To disengage the timer before recording starts, press TIMER

again. Pressing once more re-engages it.

●

In case of a power failure after programming, the VCR’s

memory backup keeps your selections for approximately

3 minutes.

10:00 11:00 12:00

ATTENTION

If there is a conflict in the timer schedule and one program
overlaps with another, only the parts shown below in gray
will be recorded.

Pattern 1: The program with the lower program number

will be recorded.

Pattern 2: The program that is broadcast earlier will be

recorded.

Pattern 3: The program that is broadcast earlier will be

recorded, followed by the remaining portion of

the other program.

CH10
CH40 Not recorded
Program 1
Program 2
10:00 11:00 12:00
CH10
Program 2 Not recorded
Program 1
CH40
10:00 11:00 12:00
CH10
CH40
Program 1 Program 2
Not recorded
NUMBER "9"
SP/EP
PROG.
NUMBER "8"
CANCEL
TIMER
OK
STOP+/–