EN 35

Questions and answers

PLAYBACK

Q. What happens if the tape reaches its end during playback or search?

A. The VCR automatically rewinds it to the beginning.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can the VCR indefinitely remain in still mode?

A.No. It stops automatically after 5 minutes to protect

the heads.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.During picture search, still picture playback and frame-by-frame playback, the picture is intermittent. What’s the cause?

A.Picture loss occurs when these types of playback are attempted with a tape recorded in LP mode. Pressing PLAY ( 3 ) to return to normal playback will restore

the picture.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. When returning from variable-speed picture search to normal playback, the picture is disturbed. Should I be concerned about this?

A. No, it is normal.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. When playing back programs that have been timer- recorded consecutively (such one program from 8:00 to 9:00 and another one from 9:00 to 10:00), the picture and sound become momentarily distorted where the first program ends and the second program begins. Is this a malfunction?

A. No. This is normal.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. Other than preventing further recording, what effect does removing the safety tab have?

A. It disables marking of index codes.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. Sometimes, during index search, the VCR cannot find the program I want to see. Why not?

A. There may be index codes too close together.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.During playback, on-screen display sometimes jitters. Why does this happen?

A.If the condition of the tape being played back is not good, jittering of the video (including on-screen display) may occur.

RECORDING

Q.When I pause and then resume a recording, the end of the recording before the pause is overlapped by the new recording. Why does this happen?

A.This is normal. It reduces distortion at the pause and

resume points.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can the VCR indefinitely remain in the recording pause mode?

A.No. The VCR automatically stops after 5 minutes to protect the heads. When paused during Instant Timer Recording (ITR), the VCR shuts off automatically after

5 minutes.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.What happens if the tape reaches its end during recording?

A.The VCR automatically rewinds it to the beginning.

TIMER RECORDING

Q.REC and ä remain lit on the front display panel. Is there a problem?

A.No. This is a normal condition for a timer recording

in progress.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can I program the timer while I’m watching a tape or a TV broadcast?

A.Yes, but while you are setting the timer you will not see the tape’s or broadcast program’s picture as it is replaced by the on-screen menu. (The sound from the tape or broadcast program will be heard during the timer setting.)

MOISTURE CONDENSATION

Moisture in the air will condense on the VCR when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form on the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the VCR turned on for a few hours to evaporate the moisture before inserting a tape.

ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or interrupted. Be sure to contact your nearest JVC dealer if such troubles occur.

ATTENTION

This VCR contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the VCR does not operate correctly switch its power off and unplug the AC power cord from the AC supply. Wait for a while and then plug the power back in. Eject and check the condition of the cassette. If everything appears normal, you can operate the VCR as usual.

Page 34 Page 36
Page 35
Image 35
JVC HR-A56U Can the VCR indefinitely remain in still mode?, What happens if the tape reaches its end during recording?
Page 34 Page 36

HR-A56U specifications

The JVC HR-A56U is a VCR that emerged as a noteworthy entry in the realm of home entertainment systems, particularly during the late 1990s. It is known for its robust performance and a spectrum of features that cater to both casual viewers and avid tape collectors alike.

One of the prominent features of the HR-A56U is its remarkable video quality, enhanced by JVC's proprietary Super VHS (S-VHS) technology. This feature allows for higher resolution and improved color fidelity when using S-VHS tapes, making it an excellent choice for those who prioritize picture quality. The VCR also supports standard VHS tapes, ensuring broad compatibility with existing collections.

The SR-DST (Super Dynamic Noise Reduction) is another standout technology in the HR-A56U. This feature effectively reduces noise in the analog signal, delivering clearer audio and video playback, which is especially beneficial for tapes that have undergone multiple recordings or those stored for extended periods. The result is a pristine viewing experience, minimizing artifacts that could detract from the tape's original quality.

In addition to video playback, the HR-A56U offers versatile recording capabilities. It supports a range of recording speeds, including SP (Standard Play) and LP (Long Play), allowing users to choose between quality and tape duration based on their needs. The built-in timer recording function further enhances user convenience, enabling programming for up to eight different recordings at set times, ensuring that users never miss their favorite shows.

The device also incorporates an on-screen display (OSD) that provides clear information about the current status, time remaining, and other operational details. This function simplifies navigation and settings adjustments, making it user-friendly even for those unfamiliar with VCR technology.

For connectivity, the HR-A56U includes various inputs and outputs, including standard composite video and audio connections. This allows easy integration with other audio-visual components such as televisions and sound systems, ensuring a seamless viewing experience.

Overall, the JVC HR-A56U remains a noteworthy option for anyone seeking a reliable and feature-rich VCR with the capacity to deliver exceptional performance. Its combination of advanced technologies, ease of use, and superior picture quality makes it a timeless choice for both collectors of vintage recordings and new users looking to explore the world of VHS.
Top Page Image Contents