42 EN, Select the deck, Enter the PlusCode number | JVC hr-dvs3u

42 EN

TIMER RECORDING

VCR Plus+® Timer Programing

With the VCR Plus+ system, timer programing is greatly simplified because each TV program has a corresponding code number which your VCR is able to recognize.

Before performing the VCR Plus+ Timer Programing:

●Make sure that the VCR’s built-in clock is set properly.

●Turn on the TV and select the AV mode.

T	2	W
1	2	3
		2
4	5	6
7	8	9
	0	4

1

DV

S-VHS

ATurn on the VCR.

Press POWER.

BLoad a cassette.

Insert a VHS (or S-VHS) cassette with the record safety tab intact.

OR

Insert a Mini DV cassette with the erase protection switch set to “REC”.

CSelect the deck.

Press S-VHSor DV.

DAccess the PlusCode No. screen.

Press PROG.

●The clock must be set to access

the PlusCode No. screen. If you have not set the clock, the Main Menu screen appears after an error message is displayed. Refer to “Plug & Play Set” ( pg. 14) or “Clock Set” ( pg. 16).

EEnter the PlusCode number.

Press the number keys to enter the PlusCode number of a program you wish to record. Then press OK.

●If you make a mistake, press

CANCEL and input the correct number.

FAccess the VCR Plus+ Program screen.

The VCR Plus+ Program screen appears (if you’re just starting out and you have selected the VHS deck, “VHS PROGRAM 1” appears).

IMPORTANT

Make sure the channel position number you wish to record is displayed; if not, see “Changing VCR Plus+® Setting” on page 44 and set the Guide Channel number correctly.

●If the number you entered is invalid, “ERROR” appears on the TV screen. Press CANCEL and input a valid PlusCode number.

●If the “GUIDE CHANNEL SET” screen appears, see “ATTENTION” on page 43.

Image 42

JVC hr-dvs3u manual 42 EN, Select the deck, Access the PlusCode No. screen, Enter the PlusCode number

Contents

Video Cassette Recorder For Customer Use Dear Customer Moisture Condensation Power Lines Power SourcesPower Cord Protection Grounding or Polarization Damage Requiring Service AccessoriesCleaning Replacement Parts Contents Front View Rear View Front Display Panel How To Use Remote To recall an indication 10 ENON-SCREEN Display for VHS deck Press DISPLAY/OSD ON-SCREEN Display for DV deck 12 EN Check the contentsConnect the VCR to power source Situate the VCR 8To connect to a TV with S-VIDEO/AUDIO input connectors Video Connection Plug & Play Set Perform Plug & Play setupWhat to do if Plug & Play setting failed 14 EN Language 16 EN Access the Clock Set screenClock Set Preparations Semiauto Clock Set Manual Clock Set 18 EN Access the Tuner Set screenTuner Set Auto Channel Set Add or skip the desired channels Access the Manual Channel Set screenManual Channel Set To add channels Installing Controller 20 EN Select the cable box’s channel Access the Cable Box Set screenTurn on the cable box If you do not use a cable box, press rt until OFF Press OK or e 22 ENEnter the cable box’s brand If the cable box’s channel does not change to DBS receiver If your DBS receiver has audio/video output connectorsHow to control the DBS receiver DBS receiver 24 EN Setting DBS receivers brand and channelAccess the DBS Receiver Set screen Turn on the DBS receiver Access the DBS Receiver Brand Set screen Enter the DBS receiver’s brandJVC Dish Network Echostar Dish Network Basic Playback 26 ENVHS deck Start recording Choose a programSet the tape speed Pause/Resume recording Activate frame-by-frame playback 28 ENSlow Motion On the VCR Push the Advanced JOG dial Press Pause Slow Motion On the Remote Variable Speed Search On the RemoteForward Repeat Playback 30 ENIndex Search Next Function Memory Soundtrack Selection Adjust the tracking manuallyManual Tracking Override automatic tracking Instant Timer Recording ITR 32 ENRecord One Program While Watching Another Elapsed Recording Time Indication Reset the counterPress C.RESET before starting recording or playback Tape Remaining Time 34 EN RetakeSecond Audio Recording Active Video Calibration PlaybackRecording Select the DV deck 36 ENDV deck Press DV DV recording indicator lights on the VCR DV recording indicator turns off 38 EN Step Right channel are mixed 40 ENPressing A. Monitor changes the soundtrack as follows Sound on the right channel is Time Code 42 EN Access the PlusCode No. screenAccess the VCR Plus+ Program screen Select the deck For the DV deck Engage the VCR’s timer modeFor the VHS deck Cable Box or DBS Receiver Users 44 EN Access the Guide Channel Set screenCable Box Control Setting pg Guide Channel Number Set Guide Channel Number Enter the receiving channel position number Express Timer Programing 46 EN Press DATE+ Enter the program dateEnter the channel position Press CH+ 48 EN Enter the program mode24HR Quick Programing Set the program start/stop time and channelPage To cancel or change a program 50 EN Confirm the overlapping programs When programs overlap each otherCancel or change program setting Select the program to modify From DV to VHS Tape Dubbing52 EN Dubbing An Entire Cassette Dubbing direction indicator S-VHS lights From VHS to DVPress DV, then press SP/LP p Prepare the VHS deck for dubbing 54 ENLocate the start point on the DV deck Pause dubbing VHS playback indicator and DV recording indicator light Locate the start point on the VHS deckPrepare the DV deck for dubbing Edit From a Camcorder 56 EN Recorder Video input Player Start the source player Set the input mode of recording deck58 EN Start the recording deck Connection to a PC with DV connector Connection to another VCRAdvantages of S-VHS video recorders VHS Audio Dubbing Audio Dubbing60 EN DV Audio Dubbing Engage the Audio Dubbing mode End Audio DubbingPress A.DUB VHS Insert Editing Insert Editing62 EN Source tape Recording tape Prepare the recording cassette Engage the Insert Editing modeAV Insert Editing VHS deck only Start Editing Program Editing Memory 8 programs x 8 scenes Access the R.A.Edit screen64 EN Select the program Start Random Assemble Editing Locate the end pointPrepare the source tape End Random Assemble Editing Check the remote control code for VCR Remote A/B Code SwitchingSet the remote control code for Remote 66 EN Before performing the following steps Set the TV brand codeOperate the TV TV CH +/-,TV VOL+/-, TV Muting, number keys Set the Cable Box brand code Press the corresponding button Power68 EN Operate the Cable Box Operate the DBS receiver Turn on the DBS receiver using its RemoteSet the DBS receiver brand code JVC Dish Network Select the mode Mode SetAccess the Mode Set screen Select the mode setting When this function is set to on 72 EN Display panel VHS Mode SET For Example While timer-recording in SP mode74 EN Channel not in use Normally select this. Hi-Fi sound is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Sound on the left Hi-Fi channel is played back Original recorded sound Enables Audio Dubbing later76 EN Audio-dubbed sound Consult your JVC dealer Indicator offRemote won’t function Batteries are discharged Message appears on the screen 78 EN VHS deck DV deck 80 EN Playback 82 EN Guide Channel Number Set Instant Timer Recording ITRTimer Warning Display Recording Resume Function HOW to Locate Your JVC Service Center 84 EN Warranty Only in U.S.A 86 EN