JVC HR-J231MS Activate Instant Review, Activate Repeat, Instant ReView, Repeat Playback

12EN

FF

LAY

2 3

q 5/8

REW

STOP

REVIEW

1 2 3

4 5 6

7 8 9

0

LAY

FF

REW

PAUSE

STOP

PLAYBACK(cont.)

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTES:

●Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

●Turn on the TV and select the VIDEO channel (or AV mode).

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTE:

Instant ReView is not possible while the recorder is in the Timer mode.

Repeat Playback

Your video recorder can automatically play back the whole tape 20 times repeatedly.

1	START PLAYBACK
	Press PLAY.
	ACTIVATE REPEAT
2	PLAYBACK
	Press PLAY and hold for over 5 seconds, then release.
	● "PLAY" on the display panel blinks slowly.
	● The tape plays 20 times automatically, and then
	stops.
3	STOP PLAYBACK
	Press STOP at any time to stop playback.

NOTE:

Pressing PLAY, REW , FF or PAUSE also stops Repeat Playback.