JVC HR-J231MS Timer Programming, Access Mode Select, Ming Screen, Enter Programme Stop Time

16ENTIMERRECORDING

Timer Programming

Remember, the clock must be set before you can programme the timer (☞ pg. 9).

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

●Select the appropriate colour system by pressing the COLOUR SYSTEM button.(☞ pg. 20)

ACCESS MODE SELECT

SCREEN

1 Press PROG.

ACCESS TIMER PROGRAM-

MING SCREEN

Press TV PROG.5/° to

2 place the pointer next to TIMER PROGRAMMING

	SP/LP	TIMER
AUTO

2 3

q 5/8

AUTO SP/LP indicator

	"TIMER PROGRAM-	CLOCK SET
	MING", then press OK.
		[TV PROG5°] =
		[CANCEL] :EXIT
	ENTER PROGRAMME
	START TIME
	Press NUMBER key "1(5)"		– P1–
	or "4(°)" to enter the time START		STOP
3 you want recording to		21:00	= – –:– –
	start.		SP

PROG.
	1	2
NUMBER	4	5
	DAILY 7	8

3

6

9

WEEKLY

● Press and hold either	DATE	TV PROG.
	25.12	– –
button to delay or	[1–6] [TV PROG5°]
advance the time by 30	[PROG./CLOCK] :NEXT
minutes.

●If the Programme is already used, press PROG. until a vacant Programming screen appears.

SP/LP/EP	0
CANCEL

TIMER

OK

TV PROG.

ENTER PROGRAMME STOP TIME

	Press NUMBER key "2(5)"		– P1–
	or "5(°)" to enter the time	START	STOP
4 you want recording to		21:00	= 22:00
	stop.		SP
		DATE	TV PROG.
	● Press and hold either
		25.12	– –
	button to delay or	[1–6] [TV PROG5°]
	advance the time by 30	[PROG./CLOCK] :NEXT
	minutes.
	ENTER PROGRAMME DATE
5 Press NUMBER key "3(5)" or "6(°)" to enter the date.