JVC HR-J231MS Select Position, Store Channel, Select Mode, Select Channel, Return to Normal

CONTINUE BAND SELECT

[TV PROG5°] =

[CH SET] :EXIT

TV PROG.

SELECT POSITION

EN7

Delete A Stored Channel

6

Press TV PROG.5/° until an open position in which you want to store a channel appears, then press OK.

SELECT NUMBER

TV PROG. 1

[TV PROG5°] = [CH SET] :EXIT

TURN ON THE RECORDER

1 Press OPERATE.

ACCESS CHANNEL SET

MODE SELECT SCREEN

STORE CHANNEL

2 Press and hold CH SET for more than 2 seconds. The

7

If fine tuning is not necessary, simply press STORE. For fine tuning adjustment, press TV PROG.5/° until the picture becomes clearer, then press STORE.

TV PROG. 1

[STORE] :STORE

[TV PROG5] :FINE TUNING + [TV PROG°] :FINE TUNING – [CH SET] :EXIT

	Channel Set Mode Select screen appears.
3	SELECT MODE
	Press TV PROG.5/° to place the pointer next to
	"DELETE", then press OK.
	SELECT CHANNEL

●To continue Auto Channel Search, press to select "CONTINUE",

then press OK. Repeat

steps 5 – 7 as necessary.

●To set channels for other bands, press TV PROG.5/° to select "BAND SELECT", then press OK to go back to the Band Select screen. Repeat steps 4 – 7.

TV PROG.5/°

1 ADDED

Press TV PROG.5/° until
the position number of the	SELECT NUMBER
4 channel you wish to delete	TV PROG. 1
appears.

●If the on-screen display is hard to read, refer to

[TV PROG5°] =

the recorder's display [CH SET] :EXIT panel.

DELETE CHANNEL

8

RETURN TO NORMAL SCREEN

Press CH SET.

	Press OK twice.
	The screen shows the
5 selected channel has been		TV PROG. 1 DELETED
	deleted.
	● To delete another
	channel, press OK again,	:CONTINUE
	then repeat steps 4 – 5.
		[CH SET] :EXIT
	RETURN TO NORMAL
	SCREEN
6 Press CH SET.

NOTE:

If you skipped a channel by mistake, perform steps 1 – 8 on pages 6 and 7 to re-store it.