JVC HR-J235EK specifications Activate Index Search, Display Remaining Time, Tape Remaining Time

16

PLAYBACK(cont.)

Index Search

Your recorder automatically marks

index codes at the beginning of£ 2 each recording. This function gives

you quick access to any one of 9 index codes in either direction.

6

q

NOTE:

Before starting, make sure the recorder is in the Stop mode.

	2
1	2	3
4	5	DISPLAY
		6
7	8	9
	0

1

ACTIVATE INDEX SEARCH

Press PUSH JOG% or %(ª or £). “ª 1” or “£ 1” is displayed on screen and search begins in the corresponding direction.

●To access index codes 2 through 9, press PUSH JOG

%or%repeatedly until the correct index number is
displayed.
Ex.: To locate the beginning of B from the current
position, press				PUSH JOG%twice.
To locate the beginning of D from the current
position, press PUSH JOG%once.
			Current position
	A	B			C		D		E		F
	–2			–1		1		2		3
									Index number

●When the specified index code is located, playback begins automatically.

3

1

PUSH JOG

Tape Remaining Time

DISPLAY REMAINING TIME

1 Press DISPLAY until the time remaining on the tape appears.

●By pressing the DISPLAY button, you can change the display to show the counter reading, tape remaining time, or clock time.

NOTE:

●Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "- - : - -" may sometimes appear, or the display may blink on occasion.