JVC HR-J235EK specifications Installing Batteries, How To Use

( DISPLAY Button switches display between time, date, counter readings. ☞ pg. 16

) MODE Button accesses/closes On-Screen/ B.E.S.T. screen. ☞ pg. 20

qADD TIME Button adds time to end of record- ing (5 minutes each time button is pressed.) ☞ pg. 27

wDAILY Button enables timer recording of daily serials. ☞ pg. 27

eWEEKLY Button enables timer recording of weekly serials. ☞ pg. 27

rAUX Button sets recorder's input mode. ☞ pg. 32

tTIMER Button — same as button on recorder. ☞ pg. 27

yTV PROG. +/– Button selects preset. ☞ pg. 8 u DATE +/– Button inputs date of programme for

timer recording. ☞ pg. 28

i TV/VCR Switch enables remote control of VCR or connected TV. ☞ pg. 33

o TV/VIDEO Button switches control between TV and VCR. ☞ pg. 33

p Fast Forward [FF] Button fast-forwards tape; initiates high-speed forward search. ☞ pg. 11 Q PAUSE Button — same as button on recorder.

☞pg. 12

WSTOP Button — same as button on recorder. ☞ pg. 11

EPROG CHECK Button accesses Program screens (next program's information screen appears each time button is pressed). ☞ pg. 29

ROK Button enters selections made in on-screen menus. ☞ pg. 8

TTV VOL %Þ Button controls volume of con- nected TV. ☞ pg. 33

47

Installing Batteries

1Open the battery compartment cover.

2Insert 2 "R6"-size batteries (provided) in the correct directions.

3Replace the cover.

How To Use

The remote control can operate most of your video recorder's functions, as well as basic functions of TV sets of JVC and other brands. ☞ pg. 33.

●Point the remote control toward the sensor window.

●The maximum operating distance of the remote control is about 8 m.

NOTE:

If for some reason the remote control doesn't work properly, remove its batteries, wait a short time and then try again.