JVC HR-J245EA G-CODE Setup, 14EN, Timerrecording, Guide Program Number Set, Turn On The Recorder

14EN

TIMERRECORDING

G-CODESetup

2 3

q 5/8

The G-CODEtimer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the G-CODEnumber for the TV program you wish to record (found in most TV listings) and the recorder’s timer is automatically programmed.

You have to set "Guide Prog." numbers, which are assigned to each station for purposes of G-CODEtimer programming, for all the stations stored in your recorder's memory to get proper results. If you know the Guide Prog. numbers, perform the following steps. If not, go to "Guide Prog. Number Set" on page 15.

Before G-CODEsetup you must have performed the following procedures:

●Tuner setting (☞ pg. 4, 24)

●Clock setting (☞ pg. 6)

IMPORTANT

Perform the following procedure after Auto Set Up on page 4 and/or the channel setting steps on pages 24 – 27.

After setting the Guide Program Numbers, channel positions may be incorrect if you stored or skipped channels. In this case, re-perform Guide Program Number setting.

1	2	3
4	5	6
7/	8	9
	0	4
2
1	3	Á
¦	7	8
1	4	¢

MENU

3

Guide Program Number Set

MAKE LIST OF STORED STATION NAMES, CHANNEL POSITIONS AND GUIDE PROG NO.

1	(Ex.)
		A	Channel	B Station	C Guide Prog.
			position	name	No.
			1	ABC	1
			2	SBS	2

TURN ON THE RECORDER

2 Press .

ACCESS MAIN MENU

SCREEN

3 Press MENU twice.