JVC HR-J245EA Basic Connections, Check Contents, Situate Recorder, Connect Recorder To Mains

INSTALLINGYOURNEWRECORDEREN3

Basic Connections

Aerial terminal

Back of TV	RF Cable
	(provided)

	TV
AV-IN terminals	Aerial
	Cable
	AV Cable
	(not provided)

Mains Power

Cord

Rear View

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

	CHECK CONTENTS
	Make sure the package contains all of the accessories
1 listed in “Specifications” (☞ pg. 34).
	SITUATE RECORDER
2 Place the recorder on a stable, horizontal surface.
	CONNECT RECORDER TO
3	TV
	The connection method you use depends on the type of
	TV you have.
	RF CONNECTION
	● To Connect To A TV With NO AV Input Terminals . . .
	a– Disconnect the TV aerial cable from the TV.
	b– Connect the TV aerial cable to the ANT. IN jack
	on the rear panel of the recorder.
	c– Connect the provided RF cable between the RF
	OUT jack on the rear panel of the recorder and the
	TV’s aerial terminal.
	Before operating the recorder, make sure the TV’s
	channel is set to the VIDEO channel (☞ pg. 5).

AV CONNECTION

●To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect an optional AV cable between the AUDIO OUT and VIDEO OUT connectors on the rear panel of the recorder and the TV’s AV-IN terminals .

Before operating the recorder, make sure the TV is set to the VIDEO (or AV) mode.

CONNECT RECORDER TO MAINS

Mains outlet

AUDIO OUT/

VIDEO OUT

RF output channel adjustment screw

4 Plug the end of the mains power cord into a mains outlet.

Connect the power plug to an AC outlet before installing the lithium battery. ☞ pg. 5

After you plug the mains power cord into a mains outlet, the Auto Set Up display appears on the TV screen and/or on the

recorder's front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder ☞ pg. 4.