Filename [HRJ261EU1.fm]
Masterpage:Left
20 EN RECORDING (cont.)
Elapsed Recording Time Indication
1Set the counter display.
Press – –:– – until a counter reading appears on the front
display panel.
2Reset the counter.
Press 0000 before starting recording or playback.
●The counter is reset to “0:00:00” and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
Tape Remaining Time
Press – –:– – until the time remaining on the tape appears.
●The front display panel shows the tape remaining time with
“y“ displayed.
●By pressing the – –:– – button, you can change the display to
show the counter reading, channel position*, clock time or
tape remaining time.
* Channel position is not displayed during playback.
NOTE:
Depending on the type of tape used, the tape remaining time
reading may not appear right away, or is not correct. “– –:– –”
may sometimes appear, or the display may blink on occasion.
HRJ261EU1.fm Page 20 Friday, December 10, 1999 5:40 PM