Filename [HRJ261EU3.fm]
Masterpage:Left
34 EN SUBSIDIARY SETTINGS (cont.)
Manual Channel Set
Store channels that were not stored during Auto Set Up
(墌pg.8), Preset Downl oad (墌pg. 10) or Auto Channel Set
(墌pg.32).
AAccess the Main Menu screen.
Press MENU.
BAccess the Confirmation screen.
Press rt to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or e. The
Confirmation screen appears.
CSelect the channel position.
Press rt w e until an open
position in which you want to
store a channel begins blinking,
then press OK. The Manual
Channel Set screen appears.
DSelect the band.
EInput the channel.
Press the NUMBER keys to input the channel number you
want to store.
●Input “0” before any single number entries.
●To input the registered station name (ID – 墌pg.37), press e
until “– – – –” (ID setting) begins blinking, then press rt.
●For fine tuning adjustment, press e until “+/–” begins blinking,
then press rt. While tuning, “+” or “–” appears.
FEnter new channel information.
Press OK and the Confirmation screen appears.
●Repeat steps 3 – 6 as necessary.
GClose the Confirmation screen.
Press MENU.
●To change positions, see “Change Station Channel Position”
(墌pg.35).
●If you wish to set station names other than the ones registered
in your recorder, see “Set Stations (B)” (墌pg.36).
The blueback screen and the
programme currently being
broadcast by the selected
channel appear alternately for 8
seconds each.
(E
xamp
l
e
)
T
o store
i
n pos
i
t
i
on
1
2
.
Press rt to change the band
between CH (regular) and CC
(cable), then press e.
HRJ261EU3.fm Page 34 Wednesday, February 9, 2000 5:35 PM