Filename [HRJ480EU2.fm]
Masterpage:Right
EN 23
DSet the tape speed. (HR-J480EU only)
Press SP/LP (p).
ESet the VPS/PDC mode.
Press VPS/PDC to select “ON” or “OFF”.
●If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is
set to ON.
●If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is
set to OFF.
墌“VPS/PDC Recording” on page25.
FReturn to the normal screen.
Press PROG or OK. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears. If “PROGRAM OVERLAPPED” appears
on the TV screen, see page27.
●Repeat steps 1 – 6 for each additional programme.
GEngage the recorder’s timer mode.
Press # (TIMER). The recorder turns off automatically and
# appears on the front display panel.
●To disengage the timer mode, press # (TIMER) again.
NOTES:
●To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays.
●To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday — Friday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
●You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on the TV screen. To record
the extra programme, you must first cancel any unnecessary
programmes (墌pg.26).
●It is not possible to timer-record a TV programme with a
SHOWVIEW number which starts with “0”.
ATTE NTI ON
Guide Program Number Set
“GUIDE PROG SET” appears after performing step 3 if the
Guide Program number for the SHOWVIEW number you
entered has not been set.
●Press the NUMBER keys or rt to input the channel
position number on which your recorder receives that
station, then press OK or e to set the Guide Program
number. The SHOWVIEW Program screen appears.
(Example)
To timer-record a ZDF
programme with the
SHOWVIEW system.
* If your recorder receives ZDF on
the channel position 2, press OK
or e after entering “2”.
HRJ480EU2.fm Page 23 Friday, January 12, 2001 2:59 PM