JVC HR-J281, HR-J289EU, HR-J280 specifications Edit From a Camcorder

EDITING EN 29

Edit From A

Camcorder

Your recorder

Cable adapter (not provided)

Audio/Video cable

AUDIO OUT (not provided)

Camcorder

VIDEO OUT

You can use a camcorder as the source player and your recorder as the recorder.

A Make connections.

Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder’s AV1 (L-1) IN/OUT or AV2 (L-2) IN/DECODER connector via a cable adapter.

B Set the recorder’s input mode.

Press AUX (NUMBER key “0”) and/or PR to select “L-1” for the AV1 (L-1) IN/OUT connector, or “L-2” for the AV2 (L-2) IN/DECODER connector, depending on the connectors being used.

C Set the edit mode.

See “PICTURE CONTROL” on page 35.

D Start the camcorder.

Engage the Play mode of the camcorder.

E Start the recorder.

Engage the Record mode of the recorder.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

Player