– Other Functions –
Changing Remote Control Code
This remote control is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals. This remote control is preset to send A code signals because your recorder is initially set to respond to A code signals. You can easily modify your recorder and the remote control to respond to B code signals. When using two JVC recorders, set two recorders and their remote controls to different codes, so that you can operate these recorders separately.
ASet remote control code for remote control
APress and hold VCR.
BPress the Number key “2”.
C Press OK, and release VCR.
● The remote control now can transmit B code control signals.
BCheck remote control code for recorder
Press and hold PLAY (4) on the recorder for more than 5 seconds while the recorder is turned off. The code currently set appears on the display panel.
CChange code for recorder
Press any key on the remote control. The recorder now responds to B code control signals.
●To set the remote control and the recorder back to A code
control signals, repeat the same procedure as shown above except pressing the Number key “1” in step B of 1.
To control two recorders with the same remote control
You can control two JVC recorders by switching the remote control code for the remote control between A and B ( step A), keeping two recorders to different control codes.
●To change only the remote control code for the remote control, DO NOT perform steps Band C.
Editing
You can use your recorder as the playback or recording deck.You can use a camcorder as the source player and your recorder as the recording deck. Refer also to the other components’ instruction manuals for connection and its operations.
AMake connections
Example: When using this recorder as the source player
This recorder (for playback)
To AUDIO/VIDEO OUT
AV cable (not supplied)
To AV input
Another recorder (for recording)
●When using this recorder as the recording deck, connect this recorder’s AV input connectors to the AV output connectors on the other recorder. If the source player is monaural, connect the audio output connector on the source player to the left audio input connector on this recorder.
BLoad cassettes
Insert the playback cassette into the source player and the cassette to be recorded on into the recording deck.
CSelect input mode on recording deck
Select the correct external input on the recording deck.
On this recorder (when using this recorder as the recording deck); Select
On the remote control
Press AUX or
On the recorder
Press PAUSE[PR], and then FF[PR+] or
DSelect edit mode
Set the edit mode to “ON” for the recorders if such a mode is equipped.
●On this recorder, set “PICTURE CONTROL” to “EDIT”.
EStart playback
Press PLAY (4) on the source player.
FStart recording
Press REC (7) on the recording deck.
