Timer Recording
Up to 8 timer recording programs can be made using Express timer programing method as far as a year in advance. Remember, the clock must be set before you can program the timer.
NOTES:
●If all the 8 programs have already been set, “PROGRAM FULL” appears on the TV screen.
●After timer recording is completed, the recorder turns off automatically.
●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.
●In case of a power failure after programming, the recorder’s memory backup keeps your selections (if the lithium battery is not exhausted).
Express Timer Programing
●Remember, the clock must be set before you can program the timer.
●Load a cassette with the record safety tab intact. The recorder turns on, and the counter is reset, automatically.
●Select the appropriate colour system with “PAL/MESECAM” and “NTSC” in Function settings.
APress PROG on the remote control to access the Program screen.
B Press |
|
|
| – P1 – | |
or PR+/– repeatedly to enter the start | START | STOP | |||
21:00 | |||||
time, stop time, date or channel. | |||||
|
|
| SP | ||
● Press and hold START+/– or |
|
|
| ||
DATE | TV PROG | ||||
STOP+/– to increase the time in | |||||
– | – – | ||||
|
|
| |||
|
| ||||
● To set the tape speed, press SP/LP/ | [PROG] : EXIT |
| |||
|
|
|
|
EP (p).
● To
CPress OK or PROG.
●If “PROGRAM OVERLAPPED” appears, see “Program overlap warning display”.
DPress #. The recorder turns off automatically and “#” is displayed on the display panel.
NOTE:
●If the tape reaches its end during timer recordings, the recording stops and “#”, “ ” and “ $” on the front display panel blink.Press STOP/EJECT (0) on the recorder to eject the cassette or press REW (3) on the remote control to rewind the tape.
To use the recorder while it is in timer recording standby modePress #, then press 1. After you use the recorder, press # again to put the recorder into timer recording standby mode.
Checking, canceling or changing program settings
ADisengage timer
Press #, then press 1.
●When “AUTO TIMER” is set to “ON”, you do not have to press
#.
B Access Program Check screen |
|
| PR START | STOP | CH | DATE | |||
Press ". |
| 1 | 8:00 | 10:00 | 3 | 24.04 | |||
| 2 | 10:00 | 10:45 | 2 | 25.04 | ||||
● When the weekly serials are programed, | 3 | 11:30 | 13:00 | 1 | 25.04 | ||||
4 |
|
|
|
| |||||
a day of the week appears, when the | 5 |
|
|
|
| ||||
6 |
|
|
|
| |||||
daily serials are programed, “DAILY” | 7 |
|
|
|
| ||||
8 |
|
|
|
| |||||
appears. |
|
|
|
|
|
| |||
| [ | ] : NEXT |
|
| |||||
C Access Program screen |
|
|
| START | – P1 – | STOP |
| ||
Press | " | again. Each time you press | , |
|
|
|
| ||
|
| " |
|
| 8:00 |
| 10:00 |
| |
the next program’s Program screen |
|
|
|
|
| SP |
| ||
appears. |
|
|
|
| DATE |
| TV PROG | ||
|
|
|
|
|
| 24:04 |
| 3 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
| [ | ] : NEXT |
|
|
DCancel or change program setting
To cancel a program, press & when the Program screen you do not want is shown.
To change a program, press the appropriate button:
EReturn to normal screen
Press " repeatedly until no Program screen is shown.
FReengage timer recording standby mode
Press #. The recorder turns off automatically and “#” is displayed on the display panel.
●When “AUTO TIMER” is set to “ON”, the timer recording standby mode automatically resumes when you turn off the recorder.