JVC HR-J4010UM manual Other Functions, Editing

Other Functions

BLUE BACK — ON/OFF

When this function is set to “ON”, the TV screen becomes all blue in the following cases:

When receiving a channel not in use.

When stopping playback.

1Press MENU on the remote. Press SET –/+ to select

“NO NOISE BACKGROUND”.

2Press ENTER to select “ON”.

3Press MENU to return to normal screen.

JVC TV Remote Control

This Remote can control some functions (TV POWER, INPUT, TV CH –/+ and TV VOL –/+) of a remote controllable JVC TV without setting.

NOTE:

•It’s not possible to operate a unit not equipped with a remote sensor.

•This Remote can control a JVC TV only.

Editing

You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.

1Make connections

Example: When using this VCR as the playback VCR

This VCR (for playback)

To AUDIO/VIDEO OUT

Audio/video cable (not supplied)

To audio/video input

Another VCR (for recording)

•When using this VCR as the recording VCR, connect this VCR’s audio/video input connectors to the audio/video output connectors on the other VCR. If the playback VCR is monaural, connect the audio output connector on the playback VCR to the left audio input connector on this VCR.

2Load cassettes

Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.

3Select input mode on recording VCR

Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR); Select “L” — when connecting the other VCR to the audio/video input connectors on the front panel.

Press O (AUX) or CH–/+ on the Remote [CH–/+ on the VCR].

4Start playback

Press PLAY () on the playback VCR.

5Start recording

Press REC on the recording VCR.