JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU Front Display Panel ON-SCREEN Display

EN 5

FRONT DISPLAY PANEL

ON-SCREEN DISPLAY

When “O.S.D.” is set to “ON” ( pg. 35), various operational indicators appear on the TV screen.

A Operation mode indicators

BTape speed SP/LP/EP (HR-J480EU only)

*EP is for NTSC playback only.

CTape direction

DCounter display  pg. 20

ETape remaining time indicator  pg. 20

A “Timer” Indicator  pg. 23, 25

B Play Indicator

C Record Indicator

D Channel/Clock Display  pg. 11

To switch display, press – –:––. Channel position is not displayed during playback.

Mode Display (L-1, L-2 or SAt*)

*When “L-2 SELECT” is set to “SAT” ( pg. 37), “SAt” appears instead of “L-2”.

E Instant REVIEW Indicator  pg. 16

F VCR Indicator  pg. 19

G SAT# Indicator  pg. 28

F Tape position indicator

The tape position indicator appears on the TV screen when you press 3 or

5from the Stop mode

or perform an Index Search ( pg. 17). The position of

“q” in relation to “0” (beginning) or “+” (end) shows you where you are

on the tape.

BeginningEnd

NOTE:

Depending on the type of tape used, the tape position indicator may not appear correctly.

G VPS/PDC Indicator  pg. 23, 25 H Current day/month/year

I Clock display

J Channel position number and station name/ Auxiliary input indicator (L-1, L-2 or SAT*)

*When “L-2 SELECT” is set to “SAT” ( pg. 37), “SAT” appears instead of “L-2”.

K Timer warning display

A warning appears on the TV screen to tell you that the timer-recording is to start in 5 minutes if you’re not in the Timer mode at that time. The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press &.

L Cassette loaded mark