EN 23
D Set the tape speed. (HR-J480EU only)
Press SP/LP (p).
E Set the VPS/PDC mode.
Press VPS/PDC to select “ON” or “OFF”.
●If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is set to ON.
●If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is
set to OFF.
“VPS/PDC Recording” on page 25.
F Return to the normal screen.
Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM OVERLAPPED” appears on the TV screen, see page 27.
●Repeat steps 1 – 6 for each additional programme.
G Engage the recorder’s timer mode.
Press # (TIMER). The recorder turns off automatically and
#appears on the front display panel.
●To disengage the timer mode, press # (TIMER) again.
NOTES:
●To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can compensate for anticipated programme schedule delays.
●To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.
●You can programme this recorder to
the extra programme, you must first cancel any unnecessary programmes ( pg. 26).
●It is not possible to
ATTENTION
Guide Program Number Set
“GUIDE PROG SET” appears after performing step 3 if the Guide Program number for the SHOWVIEW number you entered has not been set.
●Press the NUMBER keys or rt to input the channel position number on which your recorder receives that station, then press OK or e to set the Guide Program
number. The SHOWVIEW Program screen appears.
(Example)
To
* If your recorder receives ZDF on the channel position 2, press OK or e after entering “2”.
