Integra DHC-9.9 instruction manual 12Note, Listening to the Radio—Continued

Listening to the Radio—Continued

■Category Search Mode

Selecting Channels on the AV controller:

1

Remote

controller

Receiver

Enter

Press the [Receiver] Remote Mode button, and then press the [Enter] button repeatedly to select Category Search mode.

This procedure can also be performed on the AV controller by using its [Tuner] button, and [Tuning Mode] but- ton.

1		Press the [Tuning Mode] button
	AV controller	repeatedly to select Channel
		Search mode or Category Search
		mode.
2		Press [Enter] repeatedly to select
	AV controller	a category.

2	Use the Left and Right [e]/[r]
	buttons to select a category, and

	use the Up and Down [q]/[w] but-
Enter	tons to select a channel in that
	category.

■Direct Tuning

3

AV controller

Use the Tuning Up and Down

[q]/[w] buttons to select a chan- nel.

In Channel Search mode, you can select any channel.

In Category Search mode, you can only select channels from the currently selected category.

You can select an XM radio channel directly by entering its number.

Selecting the Previous Channel:

1

Remote

controller

Receiver

D.TUN

Clear

Press the [Receiver] Remote Mode button, followed by the [D.TUN] button.

The [Receiver] button flashes.

AV controller To listen to the previously selected XM channel, press the [Return] button.

Remote

controller

	n
	r
tu
Re

2			Within 8 seconds, use the num-
DVD	VCR/DVR	CBL/SAT	ber buttons to enter the channel
			number.
1	2	3
Game/TV	AUX 1	AUX 2	For example, to select channel #20,
4	5	6
Tape	Tuner	CD	press 0, 2, 0, or 2, 0, [Enter].
7	8	9

D.TUN

0Clear

12Note:

While the [Receiver] button is flashing, you cannot select another input source with the remote controller.

77