Integra DHC-9.9 Monitor Out Setup, The “Input/Output Assign” menu, appears, Analog, HDMI Main

First Time Setup—Continued

Monitor Out Setup

	On	Standby			TV
						Input
	DVD	VCR/DVR		CBL/SAT
	1		2	3		+
	Game/TV	AUX 1		AUX 2		TV CH
	4		5	6		-
	Tape	Tuner		CD
	7		8	9
	Phono			D.TUN		TV VOL
	+10		0	Clear
	--/--- 10		11		12
	Input Selector
		Macro
	1		2	3		Zone3
		Remote Mode
	DVD	VCR		CD		Zone2
				CDR/MD			1
	TV	Cable		Dock		Receiver
		SAT				Tape/AMP
	Dimmer					Sleep
2, 3			nu	Me			2–6
			Me
		op		nu
		T
	+
	CH		Enter			VOL
	Disc
	Album
	-		G
1, 7				it
	Prev		uide	Ex
		Se			n
	CH		tup	ur
				Ret
	Display					Muting
	Rec		Playlist			Random
		Listening Mode
	Stereo	Surround
	Repeat	Audio		Subtitle		Play Mode

2	Use the Up and Down [q]/[w] but-
	tons to select “1. Input/Output
	Assign”, and then press [Enter].
Enter	The “Input/Output Assign” menu
	appears.
		1. Input/Output Assign
	1.	Monitor Out
Enter	2.	HDMI Input
	3.	Component Video Input
	4.	Digital Audio Input
	5.	Analog Audio Input
3	Use the Up and Down [q]/[w] but-
	tons to select “1. Monitor Out”,
	and then press [Enter].
Enter	The “Monitor Out” menu appears.
		1–1.	Monitor Out
	Monitor Out			Analog
	Resolution			Through
Enter	Brightness			0
	Contrast			0
	Hue			0
	Saturation			0
		MOVE	VALUE	RETURN RETURN SETUP EXIT

Direct THX All ST

If you connect your TV to the COMPONENT VIDEO MONITOR OUT, set the “Monitor Out” setting to “Analog” so that the onscreen setup menus are displayed and composite video and S-Video sources are upcon- verted and output by the COMPONENT VIDEO MON- ITOR OUT 1 or 2.

If you connect your TV to the HDMI OUT MAIN or HDMI OUT SUB, set the “Monitor Out” setting to “HDMI Main” or “HDMI Sub”, respectively, so that the onscreen setup menus are displayed and composite video, S-Video, and component video sources are upconverted and output by the HDMI OUT MAIN or

HDMI OUT SUB.

You can specify the output resolution for the HDMI out- puts and COMPONENT VIDEO MONITOR OUT and have the AV controller upconvert the picture resolution as necessary to match the resolution supported by your TV.

1		Press the [Receiver] button, fol-
		lowed by the [Setup] button.
Receiver		The main menu appears onscreen.
		If the main menu doesn’t appear, make
S		sure the appropriate external input is
et	p	selected on your TV.
u

4

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select “Monitor Out”, and use the Left and Right [e]/[r] buttons to select:

Analog:

Select this if your TV is connected to a video output other than the HDMI OUT MAIN or HDMI OUT SUB.

HDMI Main:

Select this if your TV is connected to the HDMI OUT MAIN.

HDMI Sub:

Select this if your TV is connected to the HDMI OUT SUB.

Note:

When “HDMI Main” or “HDMI Sub” is selected, the onscreen setup menus are output by only the HDMI outputs.

If you’re not using the HDMI outputs and select “HDMI Main” or “HDMI Sub” by mistake and the menus dis- appear, press the AV controller’s [HDMI Out] button so that “Monitor Out: Analog” appears on the display.

49