Integra DHC-9.9 Signing Up for XM Satellite Radio, Selecting XM Radio Channels, Notes

Listening to the Radio—Continued

Signing Up for XM Satellite Radio

Once you have installed the XM Mini-Tuner and Home Dock, you are ready to subscribe to XM Satellite Radio. You’ll need a major credit card and your XM Radio ID. There are three places you can find your 8-character XM Radio ID:

1. On the XM Mini-Tuner

2. On the XM Mini-Tuner packaging

3. On XM Channel 0, as explained below

1 Use the Tuning Up and Down

AV controller [q]/[w] buttons to select RADIO

ID.

Your XM Radio ID number is dis- played. Write it below for reference.

ID

2	To sign up, go to:
	http://activate.xmradio.com
	Or call: 1-800-967-2346
	For XM Canada, go to:
	http://xmradio.ca
	Or call: 1-877-438-9677

Notes:

•RADIO ID cannot be selected in Category Search mode. You must select Channel Search mode (see page 76).

•The following letters are not used in XM Satellite Radio IDs: I, O, S, F.

•XM Satellite Radio will transmit a special signal to your AV controller to activate the full channel lineup. Activation normally takes between 10 and 15 minutes, but during busy peak periods, you may need to leave the AV controller turned on for up to an hour.

Selecting XM Radio Channels

There are three ways to select XM radio channels:

1.Channel Search mode: select any channel.

2.Category Search mode: select channels by category.

3.Direct tuning: enter channel number.

Note:

You can’t select Channel Search mode or Category

Search mode while the Tuning Arrow indicators are flashing, as tuning is in progress.

	On	Standby			TV
Number						Input
	DVD	VCR/DVR		CBL/SAT
buttons	1		2	3		+
	Game/TV	AUX 1		AUX 2		TV CH
	4		5	6		-
	Tape	Tuner		CD
	7		8	9
	Phono			D.TUN		TV VOL
	+10		0	Clear			D.TUN
	--/--- 10		11		12
	Input Selector
		Macro
	1		2	3		Zone3
		Remote Mode
	DVD	VCR		CD		Zone2
				CDR/MD			Receiver
	TV	Cable		Dock		Receiver
		SAT				Tape/AMP
	Dimmer					Sleep
			nu	Me
			Me
		op		nu
		T
	+						Enter
	CH		Enter			VOL
	Disc
	Album
	-		G
				it
	Prev		uide	Ex
		Se			n
	CH		tup	ur
				Ret
	Display					Muting
	Rec		Playlist			Random
		Listening Mode
	Stereo	Surround

■Channel Search Mode

1Press the [Receiver] Remote Mode button, and then press the

Receiver	[Enter] button repeatedly to
	select Channel Search mode.

Enter

This procedure can also be performed on the AV controller by using its [Tuner] button, and [Tuning Mode] but- ton.

2 Use the Up and Down [q]/[w] but-

tons to select a channel.

Channel number

Enter

Channel name

You can also use the Left and Right [e]/[r] buttons to select a category.

76