Integra DHC-9.9 instruction manual Speaker Level Calibration, Advanced Setup—Continued, Notes

Advanced Setup—Continued

6

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select a speaker, and use the Left and Right [e]/[r] but- tons to specify the distance.

Specify the distance from the speaker to your listening position.

Notes:

•The “Center” distance cannot be set if the “Center” is set to “None” (page 104).

•The “SurrRight” and “SurrLeft” dis- tances cannot be set if the “Sur- round” is set to “None” (page 104).

•The “SurrBack R” and “SurrBack L” distances cannot be set if “Speaker Type” is set to “Bi-Amp” (page 55), “SurrBack” is set to “None” (page 104).

•The “Subwoofer” distance cannot be set if “Subwoofer” is set to “No” (page 105).

Speaker Level Calibration

These settings are set automatically by the Automatic Speaker Setup function (see page 58).

With the “Level Calibration” settings, you can adjust the level of each speaker while listening to the test tone so that the volume of each speaker is the same at the listen- ing position.

Notes:

•The speakers cannot be calibrated while the output of the AV controller is muted.

•The test tone is output at the standard level for THX, which is 0 dB (absolute volume setting 82). If you nor- mally listen at volume settings below this, be careful because the test tone will be much louder.

7	8	9
Phono		D.TUN	TV VOL
+10	0	Clear
--/--- 10	11	12
Input Selector
	Macro
1	2	3	Zone3
	Remote Mode
DVD	VCR	CD	Zone2
		CDR/MD		1
TV	Cable	Dock	Receiver
	SAT		Tape/AMP

7	Repeat step 6 for each speaker.
8	Press the [Setup] button.
	Setup closes.
	S
	et
	u
	p

Note:

This procedure can also be performed on the AV control-

	Dimmer							Sleep
				nu	Me			2–5
			Me
		op				nu
		T
	+
	CH			Enter				VOL
	Disc
	Album
1, 6	-		G
						it
	Prev		uide		Ex
		Se					n
	CH		tu			ur
				p	R
	Display							Muting
	Rec			Playlist				Random
		Listening Mode
	Stereo	Surround

ler by using its [Setup] button, arrow buttons, and [Enter] button.

1

Receiver

Setup

Press the [Receiver] Remote but- ton, followed by the [Setup] but- ton.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

108