Integra DHC-9.9 instruction manual Front & Rear Panels—Continued, vBALANCE L/R INPUT

Front & Rear Panels—Continued

vBALANCE L/R INPUT

This balanced XLR input is for connecting a com- ponent with a stereo balanced XLR output. For a mono source, connect to the BALANCE L XLR.

wCD IN

This analog audio input is for connecting a CD player’s analog audio output.

xTAPE IN/OUT

These analog audio input and output jacks are for connecting a recorder with an analog audio input and output, such as a cassette deck, MD recorder, etc.

yAUX 1 IN

A VCR for playback only or other video source can be connected here. There’s S-Video and composite video input jacks for connecting the video signal.

zGAME/TV IN

A game console or TV output can be connected here. There’s S-Video and composite video input jacks for connecting the video signal.

cr CBL/SAT IN

A cable or satellite receiver can be connected here. There’s S-Video and composite video input jacks for connecting the video signal.

cs VCR/DVR IN/OUT

A video component, such as a VCR or DVR, can be connected here for recording and playback. There’s S-Video and composite video input and output jacks for connecting the video signal.

ct DVD IN

This input is for connecting a DVD player. There’s S-Video and composite video input jacks for con- necting the video signal.

dk FRONT L/R, CENTER, SURR L/R, SURR

BACK L/R and SUBWOOFER PREOUT

These balanced XLR outputs are for connecting a multichannel power amplifier and powered sub- woofer.

The FRONT L/R and SURR BACK L/R outputs can be used with front speakers and surround back speakers, respectively, or used to bi-amp the front speakers. See “Bi-amping the Front Speakers” on page 25.

dl MULTI CH input: FRONT L/R, CENTER,

SUBWOOFER, SURR L/R, and SURR BACK L/R

This analog multichannel input is for connecting a component with a 5.1/7.1-channel analog audio out- put, such as a DVD player, DVD-Audio or SACD-capable player, or an MPEG decoder.

dm PRE OUT: FRONT L/R, CENTER,

SUBWOOFER, SURR L/R, and SURR BACK L/R

This 5.1/7.1 multichannel analog audio output can be connected to the analog audio input on a multi- channel power amplifier. The SUBWOOFER jack is for connecting a powered subwoofer.

dn PRE OUT: Zone 2, Zone 3

These analog audio outputs can be connected to the line inputs on amplifiers in Zone 2 and Zone 3. The SW jacks can be connected to the inputs on pow- ered subwoofers in Zone 2 and Zone 3.

do AC OUTLET (North American model only)

These switched AC outlets can be used to supply power to other AV components. The type and num- ber of outlets depends on the country in which you purchased your AV controller.

See pages 21–44 for hookup information.

14