Integra DHC-9.9 instruction manual 122, Listening Mode Presets, Listening Mode Preset menu appears

Advanced Setup—Continued

Listening Mode Presets

On the “Listening Mode Preset” menu, you can specify a default listening mode for each of the audio formats supported by each input selector. The AV controller will then select the listening mode automatically depending on the format of the input signal. You can still select the other listening modes, although the default listening mode will be used the next time you turn on the AV con- troller.

4

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select an audio format, and use the Left and Right [e]/[r] buttons to select a listen- ing mode.

Only listening modes compatible with the audio format can be selected (see page 91).

Analog/PCM: Specifies the default lis- tening mode for analog and PCM

1

Receiver

Setup

Press the [Receiver] Remote Mode button, followed by the [Setup] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

sources.

Dolby Digital: Specifies the default lis- tening mode for Dolby Digital and Dolby Digital plus sources.

DTS: Specifies the default listening mode for DTS and DTS-HD High Res- olution sources.

2

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select “5. Listening Mode Preset”, and then press [Enter].

The “Listening Mode Preset” menu appears.

5.Listening Mode Preset

1.DVD

2.VCR/DVR

3.CBL/SAT

4.GAME/TV

5.AUX1

6.AUX2

7.TAPE

8.TUNER

9.CD

10. PHONO

MOVE ENTER ENTER RETURN RETURN SETUP EXIT

D.F. 2ch: Specifies the default listening mode for 2-channel (2/0) stereo sources in a digital format, such as Dolby Digi- tal or DTS.

D.F. Mono: Specifies the default listen- ing mode for mono sources in a digital format, such as Dolby Digital or DTS.

Multich PCM: Specifies the default listening mode for multichannel PCM sources, such as DVD-Audio.

192k/176.4k: Specifies the default lis- tening mode for high resolution

192kHz and 176.4 kHz digital sources, such as DVD-Audio. (input via HDMI)

3

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select an input selector, and then press [Enter].

The audio formats supported by that input selector appear.

5–x. Listening Mode Preset
DVD
Analog/PCM	Last Valid
Dolby Digital	Last Valid
DTS	Last Valid
D.F. 2ch	Last Valid
D.F. Mono	Last Valid

If the input selector is assigned to an HDMI IN, use the Down [w] button to select the audio formats shown on the following screen.

Dolby TrueHD: Specifies the default listening mode for Dolby TrueHD sources, such as Blu-ray or HD DVD (input via HDMI).

DTS-HD Master Audio: Specifies the default listening mode for DTS-HD Master Audio sources, such as Blu-ray or HD DVD (input via HDMI).

DSD: Specifies the default listening mode for DSD multichannel sources, such as SACD (input via HDMI).

5		When you’ve finished, press the
etu		[Setup] button.
		Setup closes.
S	p

5–x. Listening Mode Preset
DVD
Multich PCM	Last Valid
192k/176.4k	Last Valid
Dolby TrueHD	Last Valid
DTS-HD Master Audio	Last Valid
DSD	Last Valid

For the “Tuner” input selector, “Ana- log” is the only format available.

122

Note:

This procedure can also be performed on the AV control- ler by using its [Setup] button, arrow buttons, and [Enter] button.