Integra DHC-9.9 Press Enter, Appear, Following screen appears, Place the setup microphone at

First Time Setup—Continued

3 Press [Enter].

The automatic speaker setup starts.

Enter

Auto Speaker Setup

Do not unplug Setup Mic.

Please keep quiet.

Now measuring. . .

2

Test tones are played through each speaker as Audyssey MultEQ® XT Automatic Speaker Setup runs. This process takes a few minutes. Please refrain from talking during measurements and do not stand between speakers and the microphone.

4	The speaker detect results
	appear.

Auto Speaker Setup
Enter
Next
Retry
Cancel
:Yes	:No
Enter	Speaker Detect Result
MOVE	ENTER ENTER

“Yes” means that the speaker was detected. “No” means that no speaker was detected.

If you agree with the results, use the Up and Down [q]/[w] buttons to select “Next”, and then press [Enter].

The options are:

Next: Proceed to the next step. Retry: Return to step 2 and try again. Cancel: Cancel the automatic speaker

setup.

5		The following screen appears.
		Auto Speaker Setup
		Next
		2
		Please place microphone at next position at ear height.
		ENTER ENTER
		Place the setup microphone at
	Enter	the next position (see page 58),
		and then press [Enter].
		Audyssey MultEQ® XT performs more
		measurements. This takes a few minutes.
		Auto Speaker Setup
		Do not unplug Setup Mic.
		Please keep quiet.
		Now measuring. . .
		2
6		When prompted, place the setup
		microphone at the next position,
7		and repeat step 5.
		After the 3rd or 7th measure-
		ment, the following screen
		appears.

Enter

Auto Speaker Setup

Next

Finish(Calculate )

Enter

Select [Next] to measure the next position, or select [Finish] to calculate the Audyssey MultEQ room EQ solution.

MOVE ENTER ENTER

Use the Up and Down [q]/[w] but- tons to select an option, and then press [Enter].

Next:

Select “Next” to begin measuring the next measurement position. After the 8th measurement has been taken, the procedure automatically proceeds to step 8.

Finish(Calculate):

Select this if you don’t want to measure any more listening posi- tions and are ready to calculate the results, then go to step 8.

60