Integra DHC-9.9 instruction manual Displaying Radio Text RT, Finding Stations by Type PTY

Listening to the Radio—Continued

Displaying Radio Text (RT)

RT/PTY/TP

When tuned to an RDS station that’s broadcasting text information, the text can be displayed.

Press the [RT/PTY/TP] button once.

The RT information scrolls across the display.

Notes:

•The message “Waiting” may appear while the AV con- troller waits for the RT information.

•If the message “No Text Data” appears on the display, no RT information is available.

Finding Stations by Type (PTY)

2 3

1 4, 5

You can search for radio stations by type.

1	Use the [Tuner] input selector
	button to select FM.

2	Press the [RT/PTY/TP] button
	twice.
	The current program type appears on
	the display.

3 Use the Preset [e]/[r] buttons to select the type of program you want.

See the table on page 72.

4	To start the search, press [Enter].
	The AV controller searches until it finds
	a station of the type you specified, at
	which point it stops briefly before con-
	tinuing with the search.
5	When a station you want to listen
	to is found, press [Enter].
	If no stations are found, the message
	“Not Found” appears.

Listening to Traffic News (TP)

2

1 3

You can search for stations that broadcast traffic news.

1	Use the [Tuner] input selector
	button to select FM.

2	Press the [RT/PTY/TP] button
	three times.

If the current radio station is broadcast- ing TP (Traffic Program), “[TP]” will appear on the display and traffic news will be heard as and when it’s broad- cast. If “TP” without square brackets appears, this means that the station is not broadcasting TP.

3	To locate a station that is broad-
	casting TP, press [Enter].
	The AV controller searches until it finds
	a station that’s broadcasting TP.
	If no stations are found, the message
	“Not Found” appears.

73