Integra DHC-9.9 The “Speaker Settings” menu appears, Normal, front speakers normally, Bi-Amp

First Time Setup—Continued

Speaker Settings

	4		5			6		-
	Tape	Tuner			CD
If you change these 7settings,8						9you must run the auto-
	Phono				D.TUN			TV VOL
matic speaker setup again0 (see page 58).
	+10				Clear
	10			11			12
	Input Selector
		Macro
	1		2			3		Zone3
		Remote Mode
	DVD	VCR			CD			Zone2
					CDR/MD				1
	TV	Cable			Dock			Receiver
		SAT						Tape/AMP
	Dimmer							Sleep
2, 3				nu	Me				2–4
			Me
		op				nu
		T
	+
	CH			Enter				VOL
	Disc
	Album
1, 5	-		G
						it
	Prev		uide		Ex
		Se		p	R		n
	CH		tu			ur
					et
	Display							Muting
	Rec			Playlist				Random

To use bi-amping, you must change the “Speaker Type” setting. For hookup information, see page 25.

Notes:

•When bi-amping is used, the AV controller is able to drive up to 5.1 speakers in the main room.

•Before you change these settings, turn down the vol- ume.

The onscreen menus shown in this manual may be slightly different from what you see on your TV.

1		Press the [Receiver] button, fol-
		lowed by the [Setup] button.
Receiver		The main menu appears onscreen.
		If the main menu doesn’t appear, make
S		sure the appropriate external input is
et	p	selected on your TV.
u

3		Use the Up and Down [q]/[w] but-
		tons to select “1. Speaker Set-
		tings”, and then press [Enter].
	Enter	The “Speaker Settings” menu appears.
		2–1.	Speaker Settings
		Speaker Type Front		Normal
	Enter
		MOVE	VALUE	RETURN RETURN SETUP EXIT
4		Use the Up and Down [q]/[w] but-
		tons to select “Speaker Type”,
		and use the Left and Right
	Enter	[e]/[r] buttons to select:
		Normal:
		Select this if you’ve connected your
		front speakers normally.
		Bi-Amp:
		Select this if you’ve connected your
		front speakers for bi-amped opera-
		tion.
5		Press the [Setup] button.
		Setup closes.
	S
	et
	u
	p

Note:

This procedure can also be performed on the AV control- ler by using its [Setup] button, arrow buttons, and [Enter] button.

2

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select “2. Speaker Setup”, and then press [Enter].

The “Speaker Setup” menu appears.

2. Speaker Setup

1.Speaker Settings

2.Speaker Config

3.Speaker Distance

4.Level Calibration

5.Equalizer Settings

6.THX Audio Setup

55