Integra DHC-9.9 instruction manual Video Input Setup, Hdmi Input Setup, Tons to select Component

First Time Setup—Continued

5

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select “Resolution”, and use the Left and Right [e]/[r] buttons to select:

Through:

Select this to pass video through the AV controller at the same resolution and with no conversion.

Auto:

Select this to have the AV controller automatically convert video at reso- lutions not supported by your TV.

(Not available when the “Monitor Out” setting is set to “Analog”.)

480p:

Select this for 480p output and video conversion as necessary.

720p:

Select this for 720p output and video conversion as necessary.

1080i:

Select this for 1080i output and video conversion as necessary.

Notes:

•If the video source contains information that restricts output at high-resolutions, 720p or 1080i content will not be converted.

•See page 30 for charts showing how the “Monitor Out” and “Resolution” settings affect the video signal flow through the AV controller.

•This procedure can also be performed on the AV con- troller by using its [Setup] button, arrow buttons, and [Enter] button.

Video Input Setup

HDMI Input Setup

If you connect a video component to an HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector.

By default, none of the HDMI inputs are assigned.

If you’ve connected your TV to the AV controller with an HDMI cable, you can set the AV controller so that composite video, S-Video, and component video sources are upconverted* and output by the HDMI outputs. You can set this for each input selector by selecting the “- - -” option.

1080p:

Select this for 1080p output and video conversion as necessary. (Not available when the “Monitor Out” setting is set to “Analog”.)

Source:

		Output will be according to the res-
		olution level which was set with
		Resolution inside Source:
		4-4. Picture Adjust. (Setting for
		each Source becomes possible.)
6		Use the Up and Down [q]/[w] but-
		tons to select “Component
		Out2”, and use the Left and Right
	Enter	[e]/[r] buttons to select:
		Monitor:
		Select this if you’ve connected the
		COMPONENT VIDEO MONI-
		TOR OUT 2/ZONE 2 OUT to a TV
		or other component in your main
	Enter	room.
		Zone 2:

Composite video, S-Video,
	component video			HDMI
			IN
			OUT
Composite video, S-Video,				HDMI
	component video
1			Press the [Receiver] button, fol-
			lowed by the [Setup] button.
Receiver			The main menu appears onscreen.
			If the main menu doesn’t appear, make
			sure the appropriate external input is
S		tup	selected on your TV.
e

		Select this if you’ve connected the
		COMPONENT VIDEO MONI-
		TOR OUT 2/ZONE 2 OUT to a TV
		in Zone 2.
		When Monitor is selected, the COM-
		PONENT VIDEO MONITOR OUT
		2/ZONE 2 OUT outputs the same video
		as the COMPONENT VIDEO MON-
		ITOR OUT 1.
7		Press the [Setup] button.
		Setup closes.
S
et
u
	p

2

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select “1. Input/Output Assign”, and then press [Enter].

The “Input/Output Assign” menu appears.

1. Input/Output Assign

1.Monitor Out

2.HDMI Input

3.Component Video Input

4.Digital Audio Input

5.Analog Audio Input

50