Integra DHC-9.9 instruction manual HDMI1, HDMI2, HDMI3, HDMI4, First Time Setup—Continued, Notes

First Time Setup—Continued

3

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select “2. HDMI Input”, and then press [Enter].

The “HDMI Input” menu appears.

1–2.	HDMI Input
DVD		- - -
VCR/DVR		- - -
CBL/SAT		- - -
GAME/TV		- - -
AUX1		- - -
AUX2		- - -
MOVE	VALUE		RETURN		EXIT
		RETURN		SETUP
1–2.	HDMI Input
TAPE		- - -
TUNER		- - -
CD		- - -
PHONO		- - -

page 49), and the “HDMI Input” setting must be set to “- - -”. See page 29 for more information on video sig- nal flow and upconversion.

•When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See “Digital Audio Input Setup” on page 53.

•The “TUNER” input selector cannot be assigned and is fixed at the “- - -” option.

•This procedure can also be performed on the AV con- troller by using its [Setup] button, arrow buttons, and [Enter] button.

MOVE VALUE RETURN RETURN SETUP EXIT

4

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select an input selector, and use the Left and Right [e]/[r] buttons to select:

HDMI1, HDMI2, HDMI3, HDMI4:

Select the HDMI IN to which the video component has been con- nected.

- - -:

Output composite video, S-Video, and component video sources from the HDMI Out. The video output signal from the HDMI Out is the one configured in “Component Video Setup” (see page 52).

Each HDMI IN cannot be assigned to more than one input selector. When HDMI1 - HDMI4 have already been assigned, you must set first any unused input selectors to “- - -” or you will be unable to assign HDMI1 - HDMI4 to input selector.

5	Press the [Setup] button.
	Setup closes.
	S
	et
	u
	p

Notes:

•For composite video, S-Video, and component video upconversion for the HDMI OUT MAIN or HDMI OUT SUB, the “Monitor Out” setting must be set to

“HDMI Main” or “HDMI Sub”, respectively (see

51