Integra DHC-9.9 Component Video Setup, The “Component Video Input” menu, appears, Notes

First Time Setup—Continued

Component Video Setup

If you connect a video component to a COMPONENT VIDEO IN, you must assign that input to an input selector. For example, if you connect your DVD player to COMPONENT VIDEO IN 3, you must assign COM- PONENT VIDEO IN 3 to the DVD input selector.

By default, the DVD input selector is assigned to COM- PONENT VIDEO IN 1, and all of the other input selec- tors are assigned to the “- - -” option.

Input selector	Default assignment
DVD	IN1
VCR/DVR	- - -
CBL/SAT	- - -
GAME/TV	- - -
AUX1	- - -
AUX2	- - -
TAPE	- - -
TUNER	- - - (Fixed)
CD	- - -
PHONO	- - -

If you’ve connected your TV to the AV controller with a component video cable, you can set the AV controller so that composite video and S-Video sources are upcon- verted* and output by the COMPONENT VIDEO MON- ITOR OUT 1 or 2. You can set this for each input selector by selecting the “- - -” option.

Composite video, S-Video			Component video
		IN
		OUT
Composite video, S-Video			Component video
1		Press the [Receiver] button, fol-
Receiver		lowed by the [Setup] button.
		The main menu appears onscreen.
		If the main menu doesn’t appear, make
S		sure the appropriate external input is
et
	u
	p	selected on your TV.

3	Use the Up and Down [q]/[w] but-
	tons to select “3. Component
	Video Input”, and then press
Enter	[Enter].
	The “Component Video Input” menu
	appears.
Enter	1–3.	Component Video Input
	DVD		IN1
	VCR/DVR		- - -
	CBL/SAT		- - -
	GAME/TV		- - -
	AUX1		- - -
	AUX2		- - -
	MOVE	VALUE	RETURN RETURN SETUP EXIT
	1–3.	Component Video Input
	TAPE		- - -
	TUNER		- - -
	CD		- - -
	PHONO		- - -
	MOVE	VALUE	RETURN RETURN SETUP EXIT
4	Use the Up and Down [q]/[w] but-

	tons to select an input selector,
	and use the Left and Right
Enter	[e]/[r] buttons to select:
	IN1: Use the video component
	connected to COMPONENT
	VIDEO IN 1.
	IN2: Use the video component
	connected to COMPONENT
Enter	VIDEO IN 2.
	IN3: Use the video component
	connected to COMPONENT
	VIDEO IN 3.

-- -:Output composite video and S-Video sources from the

COMPONENT VIDEO MONITOR OUT.

5		Press the [Setup] button.
	S	Setup closes.
	et
	u
	p

Notes:

2

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select “1. Input/Output Assign”, and then press [Enter].

The “Input/Output Assign” menu appears.

1. Input/Output Assign

1.Monitor Out

2.HDMI Input

3.Component Video Input

4.Digital Audio Input

5.Analog Audio Input

•For composite video and S-Video upconversion for the COMPONENT VIDEO MONITOR OUT 1 or 2, the “Monitor Out” setting must be set to “Analog” (see page 49), and the “Component Video Input” set- ting must be set to “- - -”. See page 30 for more infor- mation on video signal flow and upconversion.

•This procedure can also be performed on the AV con- troller by using its [Setup] button, arrow buttons, and

[Enter] button.

52