Integra DHC-9.9 instruction manual Listening to the Radio, Listening to AM/FM Stations

Listening to the Radio

Listening to AM/FM Stations

Tuning Mode

Tuning

Tuner

With the built-in tuner, you can enjoy AM and FM radio stations and store your favorite stations as presets for easy selection.

Use the [Tuner] input selector button to select AM or FM.

In this example, FM has been selected.

Band Frequency

(Actual display depends on country.)

Tuning into AM/FM Radio Stations

■Auto Tuning Mode

1Press the [Tuning Mode] button so that the AUTO indicator appears on the display.

2Press the Tuning Up or Down

[q]/[w] button.

Searching stops when a station is found.

When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM STEREO indicator also appears. (The FM STEREO indicator will not appear on models that have

HD Radio reception.)

TUNED

AUTO

FM STEREO

■Manual Tuning Mode

1Press the [Tuning Mode] button so that the AUTO indicator disap- pears from the display.

2Press and hold the Tuning Up or

Down [q]/[w] button.

The frequency stops changing when you release the button.

Press the button repeatedly to change the frequency one step at a time.

The North American model changes FM frequency in

0.2MHz steps, 10 kHz steps for AM. For other models it’s 0.05 MHz steps for FM and 9 kHz steps for AM. In Manual Tuning mode, FM stations will be in mono.

Tuning into Weak FM Stereo Stations

If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.

67