Integra DHC-9.9 instruction manual Front & Rear Panels—Continued, au REMOTE CONTROL

Front & Rear Panels—Continued

au REMOTE CONTROL

This u(Remote Interactive) jack can be con- nected to the ujack on another u-capable Onkyo component for remote and system control.

To use u, you must make an analog audio connec- tion (RCA) between the AV controller and the other component, even if they are connected digitally.

bRS232

This port is for connecting the AV controller to home automation equipment and external control- lers.

cPHONO IN

This audio input is for connecting a turntable.

dCOMPONENT VIDEO IN 1, 2, and 3

These RCA component video inputs are for con- necting components with a component video out- put, such as a DVD player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Component Video Setup” on page 52.

eCOMPONENT VIDEO MONITOR OUT 1

This RCA component video output is for connect- ing a TV or projector with a component video input.

fCOMPONENT VIDEO MONITOR OUT 2/ZONE 2 OUT

This RCA component video output is for connect- ing a TV or projector with a component video input located in your main listening room or Zone 2.

gHDMI IN 1–4, OUT MAIN, and OUT SUB

HDMI (High Definition Multimedia Interface) con- nections carry digital audio and digital video.

The HDMI inputs are for connecting components with an HDMI output, such as a DVD player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Video Input Setup” on page 50.

The HDMI outputs are for connecting a TV or pro- jector with an HDMI input.

hSIRIUS antenna (on North American model)

This jack is for connecting a SIRIUS digital antenna, sold separately (see the separate SIRIUS instructions).

iXM antenna (on North American model)

This jack is for connecting an XM Mini-Tuner and Home Dock, sold separately (see the separate XM instructions).

jMONITOR OUT

The S-Video or composite video jack should be connected to a video input on your TV or projector.

kZONE 2 OUT

This composite video output can be connected to a video input on a TV in Zone 2.

lAM ANTENNA (not North American model)

These push terminals are for connecting an AM antenna.

mFM ANTENNA (not North American model)

This jack is for connecting an FM antenna.

nIR IN A/B and OUT

A commercially available IR receiver can be con- nected to the IR IN A or B jack, allowing you to control the AV controller while you’re in Zone 2, or control it when it’s out of sight, for example, installed in a cabinet.

A commercially available IR emitter can be con- nected to the IR OUT jack to pass IR (infrared) remote control signals through to other components.

o12V TRIGGER OUT (A/B/C)

These outputs can be connected to the 12-volt trig- ger inputs on other components.

pETHERNET port

This port is for connecting the AV controller to home automation equipment and external control- lers.

Use only shielded Ethernet cables.

qAM and FM ANTENNA (HD Radio reception) (on North American model)

The AM push terminals are for connecting an AM antenna. The FM jack is for connecting an FM antenna.

rAC INLET

The supplied power cord is connected here. The other end of the power cord should be connected to a suitable wall outlet.

sDIGITAL COAXIAL IN 1, 2, and 3

These coaxial digital audio inputs are for connect- ing components with a coaxial digital audio output, such as a CD player or DVD player. They’re assign- able, which means you can assign each one to an input selector to suit your setup. See “Digital Audio Input Setup” on page 53.

tDIGITAL OPTICAL IN 1, 2, and OUT

These optical digital audio inputs are for connecting components with an optical digital audio output, such as a CD player or DVD player. They’re assign- able, which means you can assign each one to an input selector to suit your setup. See “Digital Audio Input Setup” on page 53.

The optical digital audio output is for connecting a digital recorder with an optical digital input, such as a CD recorder.

uGND screw

This screw is for connecting a turntable’s ground wire.

13