Integra DHC-9.9 THX Audio Setup, “2ch” page 105, “Speaker Type” is, is set to “None” page

Advanced Setup—Continued

THX Audio Setup

These settings are not set automatically by the Auto- matic Speaker Setup function (see page 58).

With the “SurrBack Sp Spacing” setting, you can specify the distance between your surround back speakers.

If you’re using a THX-certified subwoofer, set the “THX Subwoofer” setting to “Yes”. You can then apply THX’s Boundary Gain Compensation (BGC) to compensate the perceived exaggeration of low frequencies for listeners sitting very close to a room boundary (i.e., wall).

You can also set the THX Loudness Plus feature “On” or “Off”. When the “Loudness Plus” is set to “On”, it is possible to enjoy even subtle nuances of audio expres- sion at low volume.

This result is only available when the THX listening mode is selected.

4

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select “SurrBack Sp Spacing”, and use the Left and Right [e]/[r] buttons to specify the distance between your sur- round back speakers:

>4ft (>1.2m) (Default): Select this if your surround back speakers are more than 4 feet (1.2 m) apart.

<1ft (< 0.3m): Select this if your sur- round back speakers are between 0 and 1 foot (0–30 cm) apart.

1ft– 4ft (0.3m–1.2m): Select this if your surround back speakers are between 1 and 4 feet (0.3–1.2m) apart.

Note:

1

Receiver

Setup

Press the [Receiver] Remote Mode button, followed by the [Setup] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

	Cannot be set if “SurrBack Ch” is set to
	“2ch” (page 105), “Speaker Type” is
	set to “Bi-Amp” (page 55), “SurrBack”
	is set to “None” (page 105).
5	Use the Up and Down [q]/[w] but-
	tons to select “THX Subwoofer”,
	and use the Left and Right
Enter	[e]/[r] buttons to select:
	No: Select this if you do not have
	a THX-certified subwoofer.

2

Enter

Use the Up and Down [q]/[w] but- tons to select “2. Speaker Setup”, and then press [Enter].

The “Speaker Setup” menu appears.

Yes: Select this if you have a THX-

certified subwoofer.

Enter

Enter

2.Speaker Setup

1.Speaker Settings

2.Speaker Config

3.Speaker Distance

4.Level Calibration

5.Equalizer Settings

6.THX Audio Setup

MOVE ENTER ENTER RETURN RETURN SETUP EXIT

6

Enter

Use the Up and Down [q]/[w] but- tons to select “BGC”, and use the Left and Right [e]/[r] but- tons to select:

Off: Select this to turn off BGC.

3

Enter

Enter

Use the Up and Down [q]/[w] but- tons to select “6. THX Audio Setup”, and then press [Enter].

The “THX Audio Setup” screen appears.

2–6.	THX Audio Setup
SurrBack Sp Spacing			> 4ft
THX Subwoofer			Yes
BGC				Off
Loudness Plus				On
Preserve THX Settings		- - -
MOVE	VALUE		RETURN SETUP EXIT
		RETURN

When “Loudness Plus” is set to “Off”, the “Preserve THX settings” can be selected.

Enter

On: Select this to turn on BGC.

Note:

This setting is only available if “THX Subwoofer” is set to “Yes” (step 5).

112