Integra DHC-9.9 Save, Review SP Config, Review SP Distance, Review SP Level, Cancel, Notes

First Time Setup—Continued

8	When the measurements are
	complete, the following screen
	appears.
	Auto Speaker Setup
		Calculating...
9	When the calculations are com-
	plete, the following screen
	appears.
	Enter
	Auto Speaker Setup
	Save
	Review SP Config
	Review SP Distance
	Review SP Level
	Cancel
	Enter
	MOVE	ENTER ENTER
	Use the Up and Down [q]/[w] but-
	tons to select an option, and then
	press [Enter].
	Save:
	Save the calculated settings and exit
	the automatic speaker setup.
	Review SP Config:
	Review the speaker configuration
	settings (see “Reviewing the
	Results” on page 63).
	Review SP Distance:
	Review the speaker distance set-
	tings (see “Reviewing the Results”
	on page 63).
	Review SP Level:
	Review the speaker level settings
	(see “Reviewing the Results” on
	page 63).
	Cancel:
	Cancel the automatic speaker setup.
10	If you selected “Save”, the results are
	saved, and the following screen
	appears.
	Auto Speaker Setup
		Saving...

11	Disconnect the setup Mic.
	Auto Speaker Setup
	Please, unplug Setup Mic.

Notes:

•When the automatic speaker setup is complete, the “Equalizer Settings” (page 110) will be set to Audys- sey.

•You can cancel the automatic speaker setup at any point in the procedure simply by disconnecting the setup microphone.

61