Integra DHC-9.9 Connecting a CD Player or Turntable, Turntable MM with no Phono Preamp Built-in

Connecting the AV Controller—Continued

Connecting a CD Player or Turntable

■CD Player or Turntable (MM) with Built-in Phono Preamp

Step 1:

Choose a connection that matches your CD player ( a , b , or c ). Use connection a for a turntable with a built-in phono preamp.

	b	IN 2
		(VCR/DVR)
		COAXIAL
	a	IN
		L
Connect one		R	OPTICAL
or the other		CD	IN 2
			(CD)
Connection
must be				c
assigned
	COAXIAL
(see page 53)
	OUT	L	R
		AUDIO	OPTICAL	CD player
		OUT	OUT

IN
L	L
R	R
CD	AUDIO
	OUTPUT

a

Turntable (MM) with

built-in phono preamp

•With connection , you can listen to and record audio from the CD player or listen in Zone 2 or Zone 3.

•To connect the CD player digitally, use connection or . (To record or listen in Zone 2 or Zone 3 as well, use a and , or and .)

Connection		AV controller	Signal flow	CD or turntable
	a	CD IN L/R	⇐	Analog audio L/R output
		DIGITAL COAXIAL IN 2 (VCR/DVR)	⇐	Digital coaxial output
	c	DIGITAL OPTICAL IN 2 (CD)	⇐	Digital optical output

■Turntable (MM) with no Phono Preamp Built-in

The AV controller’s PHONO IN is designed for use with a moving magnet (MM) type cartridge.

Use an analog audio cable to connect the AV controller’s PHONO IN L/R jacks to the audio output on your turn- table.

Notes:

•If your turntable has a ground wire, connect it to the AV controller’s GND screw. With some turntables, connecting the ground wire may produce an audible hum. If this happens, disconnect it.

•If your turntable has a moving coil (MC) type car- tridge, you’ll need a commercially available MC head amp or MC transformer. Connect your turntable to the head amp or transformer, and connect that to the AV controller’s PHONO IN L/R jacks.

•You can also use a phono equalizer to connect a turn- table with an MC-type cartridge. See your phono equalizer’s manual for details.

IN

L

R

PHONO

AUDIO

OUTPUT

L

R

41