Integra DHC-9.9 instruction manual Digital Optical in 2 CD, Satellite, cable, set-top box, etc

Connecting the AV Controller—Continued

Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source

Hint!

With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs via the AV controller, which is useful if your TV has no audio outputs.

Step 1: Video Connection

Choose a video connection that matches the video source ( A , B , or C ), and then make the connection.

If you use connection A , you must connect the AV controller to your TV with the same type of connection.

Step 2: Audio Connection

Choose an audio connection that matches the video source ( a , b , or c ), and then make the connection.

•With connection , you can listen to and record audio from the video source or listen in Zone 2 or Zone 3.

•To enjoy Dolby Digital and DTS, use connection or . (To record or listen in Zone 2 or Zone 3 as well, use and , or and .)

Connection		AV controller	Signal flow	Video source
	A	COMPONENT VIDEO IN 3	⇐	Component video output
		CBL/SAT IN S	⇐	S-Video output
	C	CBL/SAT IN V	⇐	Composite video output
		CBL/SAT IN L/R	⇐	Analog audio L/R output
	b	DIGITAL COAXIAL IN 3 (CBL/SAT)	⇐	Digital coaxial output
		DIGITAL OPTICAL IN 2 (CD)	⇐	Digital optical output

C

b

B

c

a

A

				L		R
COAXIAL	OPTICAL	Y	PB	PR	AUDIO	S VIDEO	VIDEO
OUT	OUT	COMPONENT VIDEO OUT			OUT	OUT	OUT

Connect one or the other

Connection c must be assigned (see page 53)

Satellite, cable, set-top box, etc.

36