Controlling Other Components—Continued

Remote Control Codes for Integra/Onkyo Components Connected via u

Integra/Onkyo components that are connected via u are controlled by pointing the remote controller at the AV controller, not the component. This allows you to control components that are out of view, in a rack, for example.

1

Make sure the Integra/Onkyo component

 

is connected with an ucable and an ana-

 

log audio cable (RCA).

 

See page 44 for details.

 

 

2

Enter the appropriate remote control code

 

to the Remote Mode button.

 

[DVD] Remote Mode button

 

 

5002: Integra/Onkyo DVD player with u

 

[CD] Remote Mode button

 

 

6002: Integra/Onkyo CD player with u

 

[MD] Remote Mode button

 

 

6008: Onkyo MD recorder with u

 

[CDR] Remote Mode button

 

 

6006: Onkyo CD recorder with u

 

[Dock] Remote Mode button

 

 

6004: Onkyo RI Dock with u

 

See the previous page for how to enter remote

 

control codes.

 

 

3

Press the Remote Mode button, point the

 

remote controller at the AV controller, and

operate the component.

If you want to control an Integra/Onkyo component by pointing the remote controller directly at it, or you want to control an Integra/Onkyo component that’s not con- nected via u, use the following remote control codes:

• [DVD] Remote Mode button

5001: Integra/Onkyo DVD player without u (default)

• [CD] Remote Mode button

6001: Integra/Onkyo CD player without u(default)

• [MD] Remote Mode button

6007: Onkyo MD recorder without u

• [CDR] Remote Mode button

6005: Onkyo CD recorder without u

[Dock] Remote Mode button 6003: Onkyo RI Dock without u

Note:

If you connect an u-capable Onkyo MiniDisc recorder, CD recorder, or RI Dock to the TAPE IN/OUT jacks, or connect an RI Dock to the AUX 1 jacks, for u to work properly, you must set the Input Display accord- ingly (see page 57).

Resetting the Remote Mode Buttons

You can reset a Remote Mode button to its default remote control code.

1

While holding down the Remote

 

 

Mode button that you want to

 

reset, press the TV [9] button.

 

The Remote indicator flashes three

 

times.

2

Press the Remote Mode button

 

 

again.

 

The Remote indicator flashes twice,

 

indicating that the button has been

 

reset.

 

The [DVD] and [CD] Remote Mode

 

buttons are preprogrammed with

 

remote control codes for controlling

 

Onkyo DVD players and CD players,

 

respectively. When these buttons are

 

reset, the preprogrammed codes are

 

restored.

Resetting the Remote Controller

You can reset the remote controller to its default settings.

1

While holding down the

 

 

[Receiver] Remote Mode button,

 

press the [Standby] button.

 

The Remote indicator flashes five

 

times.

2

Press the [Receiver] Remote

 

 

Mode button again.

 

The Remote indicator flashes twice,

 

indicating that the remote controller

 

has been reset.

138

Page 138
Image 138
Integra DHC-9.9 138, Controlling Other Components, Resetting the Remote Controller, Resetting the Remote Mode Buttons