Integra DHC-9.9 instruction manual Front & Rear Panels—Continued

Front & Rear Panels—Continued

fStereo button (90)

Selects the Stereo listening mode.

gListening Mode [e]/[r] buttons (90)

Select the Onkyo original listening modes.

hDisplay

See “Display” on page 11.

iDimmer (RT/PTY/TP) button (65, 73)

This button is used to adjust the display brightness.

Other models, this is the [RT/PTY/TP] button, and it’s for RDS (Radio Data System). See “Using RDS” on page 72.

jMemory button (69)

Used when storing or deleting radio presets.

kTuning Mode button (67)

Selects the Auto or Manual tuning mode.

lDisplay button (66)

Displays various information about the currently selected input source.

mSetup button

This button is used to access the onscreen setup menus that appear on the connected TV.

nTuning, Preset, Arrow, and Enter buttons

When the AM or FM input source is selected, the TUNING [q]/[w] buttons are used to tune the tuner, and the PRESET [e]/[r] buttons are used to select radio presets (see page 69).

When the onscreen setup menus are used, they work as arrow buttons and are used to select and set items. The [Enter] button is also used with the onscreen setup menus.

oMaster Volume control (64)

Sets the volume of the AV controller to −∞ dB, –81.5 dB through +18.0 dB (relative display).

The volume level can also be displayed as an abso- lute value. See “Volume Setup” on page 123.

pZone 2, Zone 3, Level [q]/[w], and Off buttons (133, 134)

The Zone 2 button is used when setting Zone 2. The Zone 3 button is used when setting Zone 3.

The Level Up and Down [q]/[w] buttons are used when adjusting the volume level of Zone 2 or Zone 3.

The Off button is used to turn off Zone 2 or Zone 3.

qPhones jack (66)

This 1/4-inch phone jack is for connecting a stan- dard pair of stereo headphones for private listening.

rHDMI Out button (46)

Used to set the “Monitor Out” setting.

sAudio Selector button (129)

Selects the audio input: analog, digital, HDMI, or multichannel.

tTone, Plus [+], and Minus [–] buttons (66, 134)

Used to adjust the tone (bass and treble), and the volume and balance of Zone 2 and Zone 3.

uInput selector buttons (64)

Select the following input sources: DVD,

VCR/DVR, CBL/SAT, Game/TV, AUX 1, AUX 2, Tape, Tuner, CD, Phono.

vReturn button

Selects the previously displayed onscreen setup menu.

wSetup Mic (59)

The included speaker setup microphone is con- nected here for automatic speaker setup.

xAUX 2 Input (40, 89)

Used to connect a camcorder, game console, and so on. There are input jacks for optical digital audio, S-Video, composite video, and analog audio.

10