Integra DHC-9.9 instruction manual Using the Listening Modes, Selecting the Listening Modes

Using the Listening Modes

Selecting the Listening Modes

For a description of each listening mode, see “About the Listening Modes” on page 97.

•The Dolby Digital and DTS listening modes can only be selected if your DVD player is connected to the AV controller with a digital audio connection (coaxial, optical, or HDMI).

•The listening modes you can select depends on the format of the input signal. To check the format, see “Displaying Source Informa- tion” on page 66.

•While a pair of headphones is connected, you can only select the Mono, Direct, or Ste- reo listening mode.

Selecting with the Remote Controller

		nu	Me
		Me
	op		nu
	T
+
CH		Enter		VOL
Disc
Album
-		G
			it
Prev		uide	Ex
	Se			n
CH		tup	Ret
Display				Muting

Rec	Playlist	Random
Surround

Stereo		Listening Mode			,
	Stereo	Surround
	Repeat	Audio	Subtitle	Play Mode	All ST
		Direct	THX	All ST
Direct	Test Tone	CH Sel	Level-	Level+	THX
	Open/Close	Video Off
		Audio Sel	L Night	Re-EQ
		VCR	DVD	HDD

RC-691M

Selecting on the AV Controller

Stereo Listening Mode

■[Stereo] button

This button selects the Stereo listening mode.

■Listening Mode [e]/[r] buttons

Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the cur- rent input source.

■[Stereo] button

This button selects the Stereo listening mode.

■[Surround] button

This button selects the Dolby Digital and DTS lis- tening modes.

■Listening Mode [e]/[r] buttons

Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the cur- rent input source.

■[Direct] button

This button selects the Direct listening mode.

■[THX] button

This button selects the THX listening modes.

■[All ST] button

This button selects the All Channel Stereo listening mode.

90