Integra DHC-9.9 Digital Audio Input Setup, The main menu appears onscreen, selected on your TV

First Time Setup—Continued

Digital Audio Input Setup

If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to OPTICAL IN 2, you must assign OPTICAL IN 2 to the “CD” input selector.

Here are the default assignments.

Input selector	Default assignment
DVD	COAX1
VCR/DVR	COAX2
CBL/SAT	COAX3
GAME/TV	OPT1
AUX1	- - -
AUX2	FRONT (Fixed)
TAPE	- - -
TUNER	- - - (Fixed)
CD	OPT2
PHONO	- - -

1			Press the [Receiver] button, fol-
			lowed by the [Setup] button.
	Receiver		The main menu appears onscreen.
			If the main menu doesn’t appear, make
	S		sure the appropriate external input is
	et
	u	p	selected on your TV.
2			Use the Up and Down [q]/[w] but-

	tons to select “1. Input/Output
	Assign”, and then press [Enter].
Enter	The “Input/Output Assign” menu
	appears.

1.Input/Output Assign

1.Monitor Out

Enter 2. HDMI Input

3.Component Video Input

4.Digital Audio Input

5.Analog Audio Input

3	Use the Up and Down [q]/[w] but-
	tons to select “4. Digital Audio
	Input”, and then press [Enter].
Enter	The “Digital Audio Input” menu
	appears.
	1–4.	Digital Audio Input
	DVD		COAX1
Enter	VCR/DVR		COAX2
	CBL/SAT		COAX3
	GAME/TV		OPT1
	AUX		- - -
	AUX2		FRONT
	TAPE		- - -
	TUNER		- - -
	CD		OPT2
	PHONO		- - -
	MOVE	VALUE	RETURN RETURN SETUP EXIT

4	Use the Up and Down [q]/[w] but-
	tons to select an input selector,
	and then use the Left and Right
Enter	[e]/[r] buttons to select:
	“COAX1”, “COAX2”, “COAX3”,
	“OPT1”, “OPT2”, or “- - - (ana-
	log)”.

•When an HDMI IN is assigned to an input selector in “HDMI Input

Setup” on page 50, this input assign-

Enter	ment is automatically set to the same
	HDMI IN. And in addition to the
	usual inputs (e.g., COAX1, COAX2,
	etc.), you can also select HDMI
	inputs.

•“AUX2” is used only for digital input from the front panel terminals. When HDMI IN is assigned to “AUX2” in the “HDMI Input Setup” on page 50, the same HDMI IN can be selected.

Examples:

If you connect your DVD player to the OPTICAL IN 1 jack, set “DVD” to “OPT1”.

If you want to listen to audio from the component connected to the OPTICAL IN 2 jack when the VCR/DVR input selector is selected, set “VCR/DVR” to “OPT2”.

If you want to listen to audio from the component connected to the COAX- IAL IN 1 jack when the CBL/SAT input selector is selected, set “CBL/SAT” to “COAX1”.

For input selectors that you don’t want to assign a digital input jack, set to “- - - (analog)”.

5	Press the [Setup] button.
	Setup closes.
	S
	et
	u
	p

Notes:

•Only FRONT can be assigned to the AUX 2 input selector.

•This procedure can also be performed on the AV con- troller by using its [Setup] button, arrow buttons, and

[Enter] button.

53