Integra DHC-9.9 Picture Adjust, Normal Full: default, Zoom WideZoom, Advanced Setup—Continued

Advanced Setup—Continued

Picture Adjust

The new “4-4. Picture Adjust” item has been added to the “1. Input/Output Assign” menu. This menu and its settings can be accessed just like the other menus. The settings are explained below.

■Game Mode

If video signal delay occurs during play on a video com- ponent, such as a Game console, connected to the AV controller, select “Game Mode” on the input selector connected to the component and set it to “On”.

Use the Left and Right [e]/[r] buttons to select: Off: Game Mode off (default).

On: Game Mode on.

■Zoom Mode

This setting determines the aspect ratio.

Normal:

Full: (default)

Zoom:

WideZoom:

Note:

The “Zoom Mode” can also be set using the [Display] button on the remote controller.

1.Press and hold the [Display] button until the setting item appears on the display.

2.Use the Up and Down [q]/[w] buttons to select “Zoom Mode”, and use the Left and Right [e]/[r] buttons to change the setting.

■ISF Mode

The receiver has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from the receiver. Accord- ingly, recommends that setup and calibration be per- formed by an ISF Certified installation technician.

Custom: User setting (All items can be freely set.)

Day: Setting when a room is bright.

Night: Setting when a room is dark.

Note:

When “ISF Mode” is selected, the setting from “Resolu- tion” to “B Contrast” is changed.

119