JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU Check the contents, Situate the recorder

INSTALLING YOUR NEW RECORDER EN 7

Basic Connections

Aerial connector

Back of TV

TV aerial cable

21-pin SCART connector

21-pin SCART	RF cable
cable	(provided)
(not provided)

Mains power cord

Back of
recorder		AV1 (L-1) IN/OUT
	Mains outlet

Make AV connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. And if you are using a stereo TV, you will need an optional 21-pin SCART cable in order to enjoy stereo playback of video tapes.

It’s essential that your video recorder be properly connected.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

A Check the contents.

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on the back cover.

B Situate the recorder.

Place the recorder on a stable, horizontal surface.

C Connect the recorder to TV.

The connection method you use depends on the type of TV you have.

RF Connection

●To connect to a TV with NO AV input connectors . . .

A Disconnect the TV aerial cable from the TV.

B Connect the TV aerial cable to the ANT. IN connector on the rear panel of the recorder.

C Connect the provided RF cable between the RF. OUT connector on the rear panel of the recorder and the TV’s aerial connector.

AV Connection

●To connect to a TV with AV input connectors . . .

A Connect the aerial, recorder and TV as per “RF

CONNECTION”.

B Connect an optional 21-pin SCART cable between the AV1 (L-1) IN/OUT connector on the rear panel of the recorder and the TV’s 21-pin SCART connector.

D Connect the recorder to mains.

Plug the end of the mains power cord into a mains outlet.

After the connection is completed, perform “Auto Set Up” on page 8.