Page 7 March 26, 2001 12:32 pm

Tuner Setting

Setting channels automatically

— Auto Channel Set

Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
AAccess Main Menu screen, then Tuner
Set screen
Press MENU on the Remote. Press rt to
move the highlight bar (arrow) to “TUNE R
SET”, then press OK or e.
BPerform Auto Channel Set
Press rt to move the highlight bar
(arrow) to “AUTO CHANNEL SET”, then
press OK or e. The VCR selects the correct
band (TV or CATV) automatically during
Auto Channel Set.
When Auto Channel Set is complete,
“SCAN COMPLETED” appears on
screen.
If the scan was unsuccessful, “SCAN
COMPLETED–NO SIGNAL–” appears
on screen. Check the connections and
start again.
Press MENU to return to normal screen.

Setting channels manually

— Manual Channel Set

You can add the channels you want or delete the channels you do
not want manually.
AAccess Main Menu screen, then Tuner
Set screen
Press MENU on the Remote. Press rt to
move the highlight bar (arrow) to “TUNE R
SET”, then press OK or e.
BAccess Manual Channel Set screen
Press rt to move the highlight bar
(arrow) to “MANUAL CHANNEL SET”,
then press OK or e.
CAdd or skip desired channels
To add channels
APress the Number keys on the Remote
to input a channel number you want to
add.
BPress OK or e to set to “ADD”.
CRepeat A to B to add other channels.
Press MENU to return to normal screen.
To skip channels
APress rt or the Number keys to select a channel number you
want to skip.
BPress OK or e to set to “SKIP”.
CRepeat A and B to skip other channels. Press MENU to return
to normal screen.
Playback

Basic Playback

ALoad a cassette
Make sure the window side is up, the rear label side is facing you
and the arrow on the front of the cassette is pointing towards the
VCR.
Do not apply too much pressure when i nserting.
The VCR turns on, and the counter on the on-screen display is
reset, automatically.
If the cassette’s record safety tab has been removed, playback
begins automatically.
BStart playback
Press PLAY (4).
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
TUNER SET
BAND CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
MANUAL CHANNEL SET
(CATV)
CH 45 ADD
PRESS NUMBER KEY (09)
OR ( , ), THEN (OK)
PRESS (MENU) TO END
During playback
Stop playback
Press STOP (8) on the
Remote.
OR Press STOP/EJECT (0) on
the VCR.
Pause playback and view still picture
Press PAUSE (9).
Press PLAY (4) to resume normal playback.
Pause and Frame-by-Frame playback
Press PAUSE (9) to pause , then press 6 (or PAUS E (9))
repeatedly.
Press PLAY (4) to resume normal playback.
High speed search
Press REW (3) or FF (5).
Press PLAY (4) to resume normal playback.
If you press and hold REW (3) or FF (5) for more than
2seconds, simply re leasing it cancels the picture search, and
normal playback resumes.
Picture search at variable speed (including slow-motion)
Press w or e repeatedly.
Press PLAY (4) to resume normal playback.
Each time you press w or e, the playback speed changes. To
decrease the speed during picture search, press the opposite
direction button repeatedly.
During still picture, press and hold e to start forward slow
motion playback. When you release the button, still picture
resumes. During still picture, holding PAUSE (9) fo r more than
2seconds also starts forward slow motion playback. If you
press PAUSE (9) again, still picture resumes.
– Initial Settings –
HR-J6008UM-EN.fm Page 7 Monday, March 26, 2001 12:32 PM