Page 9 March 26, 2001 12:32 pm
Recording
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record
safety tab. To record on it later, cover
the hole with adhesive tape.

Basic Recording

ALoad a cassette
Make sure the record safety tab is intact. If not, cover the hole
with adhesive tape before inserting the cassette.
●The VCR turns on, and the counter is reset, automatically.
BSelect recording channel
On the Remote
Press PR+/– or the Number keys.
On the VCR
Press PAUSE[CH]. The channel display on the
display panel starts blinking. While the dis play is
blinking, press FF[CH+] or REW[CH–] to select
channel. After about 5seconds, the channel display
stops blinking.
NOTES:
●You can select channel in the stop mode, recording pause mode
or during rewind/fast-forward high-speed search.
●If no cassette is loaded, or during recording pause mode, you
can select channel only by pressing FF[CH+] or REW[CH–].
●If you connect the TV and the VCR only using the RF
connection, press TV/VCR on the Remote so that the VCR mode
indicator lights on the display panel, to view the program to be
recorded.
CSet tape speed
Press SP/EP (p).
DStart recording
On the VCR, press REC (7). Or on the Remote, while holding REC
(7), press PLAY (4).

Recording Features

Specifying recording length

— Instant Timer Recording (ITR)

During recording, press REC (7) on the VCR repeatedly until the
recording length you want appears on the display panel. The
record indicator (䡬) on the display panel starts blinking.
●Each time you press the button, recording length increases in
30-minute intervals (up to 6hours).
●The VCR shuts off after recording is finished.
●To cancel an ITR, press STOP (8) on the Remote or STOP/EJECT
(0) on the VCR.

Watching one program while recording another

During recording…
●If you connect the TV and the VCR only using the RF
connection to view pictures from the VCR, press TV/VCR on the
Remote so that VCR mode indicator goes off from the display
panel. (The TV broadcast being recorded disappears.)
●If you are using the AV connection to view pictures from the
VCR, change the TV’s input mode from AV to TV.
Then, select the channel you want to watch, on the TV.

Second Audio Recording

This VCR’s built-in MTS decoder enables reception of
Multichannel TV Sound broadcast. To record a SAP program
received, set “2ND AUDIO RECORD” to “ON”.

Recording Resume Function

If there is a power outage during recording (or In stant Timer
Recording, or timer recording), the recording will resume
automatically when the power is restore d to the VCR. (No setting
is required for this function.)
During recording
Pause recording
Press PAUSE (9).
●Press PLAY (4) to resume recording.
●You can select channel in the recording pause mode.
Stop recording
Press STOP (8) on the
Remote.
OR Press STOP/EJECT (0) on
the VCR.
Record safety tab
HR-J6008UM-EN.fm Page 9 Monday, March 26, 2001 12:32 PM