JVC HR-J630U manual Select D.S.T. Mode, Make Corrections

D.S.T. SELECT

=AUTO

ON

OFF

PRESS (5,°) TO SELECT

PRESS (MENU) TO END

10

INITIALSETTINGS(cont.)

MENU

OK

2

q 5/8

2

6

6

SELECT D.S.T. MODE

You have three choices: a–Select “AUTO” and the adjustment to your VCR’s clock will be made according to the incoming signal from the host channel.

b–Select “ON” and the adjustment will be made based on the clock itself.

c–Select “OFF” if Daylight Saving Time doesn’t apply to you.

Place the arrow next to your choice by pressing

CH5° or SHUTTLE PLUS 5°, then press MENU and the Semi-Auto Clock Set screen reappears.

	1	2	3
NUMBER	4	5	6
	7	8	9
		0

CH

OK

MENU

SHUTTLE PLUS

IMPORTANT

After performing the Semi-Auto clock set procedure, make sure that the VCR is off before the next hour so that the clock can be set. (The clock is automatically adjusted on the hour except at 11:00 PM, midnight, 1:00 AM and 2:00 AM.)

Manual

2	SELECT MODE
	At the Override Auto Clock Set screen, place the
	arrow next to “MANUAL CLOCK SET” by pressing
	CH▲▼ or SHUTTLE PLUS 5°, then press OK.

SET DATE, TIME AND D.S.T.
Press the appropriate	MANUAL CLOCK SET
NUMBER keys to set the
3 date and time (if only 1	DATE	1/ 1/96 MON
	TIME	– – : – – AM
digit, press "0" first), and	D.S.T.	ON
press CH▲▼ or SHUTTLE
PLUS 5° to set AM/PM	PRESS NUMBER KEY(0-9)
and D.S.T. (Daylight
	OR (5,°), THEN (OK)
Saving Time) to “ON”
	PRESS (MENU) TO END
(automatic adjustment
based on VCR’s clock) or “OFF” (if D.S.T. doesn’t apply
to you).
Press OK after AM/PM and D.S.T. settings, and when
you’re finished with this screen, press MENU to start
the clock.

NOTE:

CH▲▼ and SHUTTLE PLUS ▲▼ can be used to perform all operations. (In this case, press OK after each setting.)

MAKE CORRECTIONS

4 To change any of the settings, press OK or SHUTTLE PLUS ª£ until the item you want to change blinks, then set as in step 3.