JVC HR-J655EA specifications Auto Set Up, SET Time, SET Date, SET Year, EN Initial Settings

6ENINITIALSETTINGS(cont.)

Auto Set Up

IMPORTANT

●Don't press any buttons on the recorder or remote that are not directly related to the step you are performing while Auto Set Up is in progress.

●If you perform Auto Set Up successfully during installa- tion, there's no need to separately perform the Clock Set or Channel Set procedures, but if adjustments become necessary they can be performed as follows:

–To reset or adjust the time ☞ pg. 8

–To add/delete channels manually ☞ pg. 36

–To reset the tuner after moving to a different location ☞ pg. 35

1 2 3

2

4 5 6

7 8 9

0 4

The Auto Set Up function simplifies installation by guiding you through the procedures of setting the clock and tuner channels

— simply follow the on-screen menus that appear.

Before starting, make sure of the following:

●The TV aerial cable should be connected to the recorder.

●The recorder's mains power cord should be connected to a mains outlet. ☞ pg. 3

●The "Video Channel Set" procedure should be done first and the TV should be set to its AV mode (with AV connection ☞ pg. 5) or video channel (with RF connection ☞ pg. 4).

	SET TIME
	Press PUSH JOG %Þto		CLOCK SET
	set the time, then press OK
1 or PUSH JOG%.		TIME	DATE	YEAR
	● Press and hold either	0:00	01.01	98
	button to delay or
	advance the time by 30	[5/°] =
	minutes.	[MENU] : EXIT

2	SET DATE
	Press PUSH JOG %Þto set the date, then press OK or
	PUSH JOG%.

●Press and hold either button to change the date by 15 days.

SET YEAR

3 Press PUSH JOG %Þto set the year, then press MENU.

1

OK

MENU

PUSH JOG