![](/images/new-backgrounds/1230662/23066255x1.webp)
28EN
INFORMATION![](/images/new-backgrounds/1230662/23066255xi18.webp)
![](/images/new-backgrounds/1230662/23066255xi19.webp)
O![](/images/new-backgrounds/1230662/23066255xi21.webp)
N![](/images/new-backgrounds/1230662/23066255xi23.webp)
MUL
TI-SYSTEM
COMPATIBILITY![](/images/new-backgrounds/1230662/23066255xi27.webp)
![](/images/new-backgrounds/1230662/23066255xi28.webp)
![](/images/new-backgrounds/1230662/23066255xi18.webp)
![](/images/new-backgrounds/1230662/23066255xi19.webp)
![](/images/new-backgrounds/1230662/23066255xi20.webp)
![](/images/new-backgrounds/1230662/23066255xi21.webp)
![](/images/new-backgrounds/1230662/23066255xi22.webp)
![](/images/new-backgrounds/1230662/23066255xi23.webp)
![](/images/new-backgrounds/1230662/23066255xi24.webp)
![](/images/new-backgrounds/1230662/23066255xi25.webp)
![](/images/new-backgrounds/1230662/23066255xi26.webp)
![](/images/new-backgrounds/1230662/23066255xi27.webp)
![](/images/new-backgrounds/1230662/23066255xi28.webp)
Setting Of The Colour System Select Buttons
COLOUR SYSTEM
Mode Display
AUTO
NTSC 3.58
NTSC 4.43
NTSC
PAL*
PAL
MESECAM
Use the COLOUR SYSTEM button on the front panel to select the colour system. Pressing this button changes the mode as illustrated on the left. The
Mode | Description |
|
|
AUTO | Usually set to this mode. This mode |
| automatically detects PAL, NTSC, SECAM |
| or MESECAM and adjusts to the colour |
| system being recorded or played back. |
| When it does not perform properly, set the |
| colour system manually. |
|
|
MANUAL | For recording, there is a choice of 4 |
| selectable modes; PAL/MESECAM/NTSC |
| 3.58/NTSC4.43. Select the mode that |
| matches the colour signal being received. |
| For playback, there is an additional mode |
| which allows NTSC tapes to be played |
| back and viewed on PAL TVs. |
|
|
*"NTSC[PAL" appears during playback only.
NOTES:
●In the AUTO mode, NTSC signals will be automatically recorded as NTSC 3.58.
●In the AUTO mode, NTSC tapes will be played back as NTSC 3.58.
●SECAM signals will always be recorded as MESECAM. Select the AUTO or the MESECAM mode when recording SECAM signals.
●When playing back a SECAM tape, select the AUTO or MESECAM mode. The playback picture will always be monochrome.
●In the NTSC4.43 mode, with some TVs,
Off-Air Recording
The
TV system
PAL B/G, I, D/K
SECAM B/G,
D/K (OIRT)
NTSC (M)
NOTE:
| Recorded tape |
| PAL |
| Recording circuit |
| PAL |
MESECAM | |
| |
tuner | MESECAM |
(B/G, I, D/K, M) |
|
| NTSC |
| NTSC 3.58 |
This model does not operate in BRAZIL