– Timer Recording –
To use the VCR while it is in timer recording standby mode
Press TIMER, then press POWER. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode.
Checking, canceling or changing program settings
ADisengage timer
Press TIMER, then press POWER.
●When “AUTO TIMER” is set to “ON”, you do not have to press
TIMER.
Program overlap warning display
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking.
| PR START | STOP | CH | DATE | ||
PROGRAM NOT COMPLETED | 1 | 8:00P | 10:00 | 12 | 12/24 |
|
2 | 10:00A | 10:45 | 40 | 12/25 |
| |
PROGRAM OVERLAP | 3 | 11:30P | 1:00 | 125 | 12/25 |
|
4 | 9:00P | 10:00 | 10 | 12/24 |
| |
| 5 |
|
|
|
|
|
| 6 |
|
|
|
|
|
| 7 |
|
|
|
|
|
| 8 |
|
|
|
|
|
| ( | , ), THEN ( ) (PROG.) : END | ||||
Example:
Program 1 (you have just made) and Program 4 overlap each other
A Select program to modify
BAccess Program Check screen
Press PROG. CHECK.
CAccess Program screen
Press PROG. CHECK again. Each time you press PROG. CHECK, the next program’s Program screen appears.
PR START | STOP | CH | DATE | ||||||
1 | 8:00P | 10:00 | 12 |
| 12/24 | ||||
2 | 10:00A | 10:45 | 40 |
| 12/25 | ||||
3 | 11:30P | 1:00 | 125 |
| 12/25 | ||||
4 |
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|
|
|
|
| PRESS (CHECK) TO NEXT | ||||||||
| PROGRAM 1 |
|
|
| |||||
| START |
|
|
| STOP |
|
|
| |
| 8:00 PM |
|
|
| 10:00 PM |
| |||
| DATE |
|
|
| CH |
|
|
| |
| 12/24/02 |
|
|
| 12 |
| SP |
|
|
PRESS (CANCEL) TO CANCEL PRESS (CHECK) TO NEXT
Press rt, then press OK or e. ● You can only select one of the
overlapping programs.
● If you do not mind this overlap, press
PROG. to finish the timer program setting. The program starting earlier or
program with the lower program number will be recorded.
B Cancel or change program setting |
| PROGRAM 4 |
To cancel a program, press CANCEL when | START | STOP |
the Program screen you do not want is | 9:00PM | 10:00PM |
DATE | CH | |
shown. | 12/24/02 | 10 SP |
TUE |
| |
To change a program, press the | PRESS (CANCEL) TO CANCEL | |
| PRESS (OK) TO CONFIRM | |
DCancel or change program setting
To cancel a program, press CANCEL when the Program screen you do not want is shown.
To change a program, press the appropriate button:
EReturn to normal screen
Press PROG. CHECK repeatedly until no Program screen is shown.
FReengage timer recording standby mode
Press TIMER. The VCR turns off automatically and “#” is displayed on the display panel.
●When “AUTO TIMER” is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.
During a power failure, the program settings listed in Program Check Screen will be reset.
appropriate button: | PRESS (PROG.) TO END |
Program screen on which you want to make changes is shown, then press OK.
●If the overlap is not yet solved, the conflicting programs will be shown on the Program check screen. Repeat the above steps again.
