JVC HR-J695U Tuner Setting, Setting channels automatically Auto Channel Set, Manual Clock Set

– Initial Settings –

CSelect D.S.T. mode

Press OK or eto move the highlight bar to “D.S.T.”, then press rtrepeatedly until the desired setting is selected.

AUTO: Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.) Be sure to select the correct time zone manually in step 4.

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.

DSelect time zone

Press OK or eto move the highlight bar to “TIME ZONE”, then press rtrepeatedly until “AUTO” or the desired time zone is selected.

Tuner Setting

Setting channels automatically

—Auto Channel Set

Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting.

A Access Main Menu screen, then Tuner	MAIN MENU
Set screen	TUNER SET
	FUNCTION SET
Press MENU on the Remote. Press rtto	INITIAL SET
move the highlight bar (arrow) to “TUNER
SET”, then press OK or e.
	PRESS ( , ), THEN (OK)
	PRESS (MENU) TO END

Each time you press the button, the time zone changes as follows:

{AUTO {ATLANTIC {EASTERN {CENTRAL

{MOUNTAIN {PACIFIC {ALASKA {HAWAII

{(back to the beginning)

EComplete Semiauto Clock Set

Press MENU to return to normal screen. Turn off the VCR. “Aut” will appear on the display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.

Selections of host channel, D.S.T. mode and time zone will be reset to “AUTO” after a power failure occurs.

Setting clock manually

BPerform Auto Channel Set

Press rtto move the highlight bar (arrow) to “AUTO CHANNEL SET”, then press OK or e. The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set.

●When Auto Channel Set is complete, “SCAN COMPLETED” appears on screen.

●If the scan was unsuccessful, “SCAN COMPLETED–NO SIGNAL–” appears on screen. Check the connections and start again.

Press MENU to return to normal screen.

TUNER SET

BANDCATV

AUTO CHANNEL SET MANUAL CHANNEL SET

SELECT WITH ( , ) AND (OK)

PRESS (MENU) TO END

AUTO CHANNEL SET

SCANNING...

PRESS (MENU) TO END

—Manual Clock Set

First follow steps 1 to 2 in “Preparations” above, then go to the following steps.

Setting channels manually

—Manual Channel Set

You can add the channels you want or delete the channels you do

ASet time, date and year

Press rtuntil the desired time appears, then press OK or e. Set the date and year in the same way.

●Holding rtchanges the time in 30- minute intervals, or changes the date in 15-day intervals.

BSelect D.S.T. mode

Press OK or eto move the highlight bar to “D.S.T.”, then press rtto select the desired setting.

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.

CLOCK SET
TIME	DATE	YEAR
– –:– –AM	1/ 1	02
AUTO CLOCK : ON
HOST CH	: AUTO	(CATV)
D.S.T.	: AUTO
TIME ZONE	: AUTO
PRESS ( ,	), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
TIME	DATE	YEAR
1:00AM	12/ 24	02 TUE
AUTO CLOCK : OFF
D.S.T.	: ON

PRESS ( , ), THEN (OK)

PRESS (MENU) TO END

not want manually.

A Access Main Menu screen, then Tuner	MAIN MENU
Set screen	FUNCTION SET
	TUNER SET
Press MENU on the Remote. Press rtto	INITIAL SET
move the highlight bar (arrow) to “TUNER
SET”, then press OK or e.
	PRESS ( , ), THEN (OK)
	PRESS (MENU) TO END
B Access Manual Channel Set screen	TUNER SET
Press rtto move the highlight bar	BAND		CATV
(arrow) to “MANUAL CHANNEL SET”,	AUTO CHANNEL SET
	MANUAL CHANNEL SET
then press OK or e.
	SELECT WITH ( ,	) AND (OK)
	PRESS (MENU) TO END
C Add or skip desired channels	MANUAL CHANNEL SET
To add channels

CStart clock

Press MENU and normal screen appears.

To make corrections any time during the process

Press OK or erepeatedly until the item you want to change blinks, then press rt.

The clock set manually will be lost after a power failure occurs.

A Press the Number keys on the Remote			(CATV)
		CH	45 ADD
to input a channel number you want to
add.	PRESS NUMBER KEY (0–9)
	OR ( ,		), THEN (OK)
B Press OK or eto set to “ADD”.	PRESS (MENU) TO END

CRepeat A to B to add other channels. Press MENU to return to normal screen.

To skip channels

APress rtor the Number keys to select a channel number you want to skip.

BPress OK or eto set to “SKIP”.

CRepeat A and B to skip other channels. Press MENU to return to normal screen.

After a power failure occurs...

●Band selection will be reset to “CATV”.

●The setting of the ADD/SKIP channel will be reset.